A-Neuvideo ANI-16-4K60 Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор A-Neuvideo ANI-16-4K60. A-Neuvideo ANI-16-4K60 16 страниц. 16x16 hdmi matrix switcher w/ smart edid management

Печатать страницу

1. Web Gui

NEUVIDEO

Web GUI

The ANI-16-4K60 can be controlled via the built-in web-GUI or external software running on a PC. You must know the current Matrix IP

address to use the Web-GUI. You can use any 3rd party IP scanning software or use our PC Software to discover the IP address. The

default network setting is DHCP. The ANI-16-4K60 supports Static IP settings and can easily be configured through the Web-GUI or PC

software. See "PC Software" further in this document.

STEP 1:

Input the IP address into the PC brower to enter Web GUI page.

When you enter the IP address of the ANI-16-4K60 into a browser, you will be greeted with the following authentication page. There

are two levels of Web-GUI login. Admin gives permission to all settings, while User is only allowed to change cross points. Select either

"Admin" or "User" (Figure 2). The default password for Admin is "admin" and the default password for User is "user". You will enter

the Web-GUI page after successful authentication.

FIGURE 1

FIGURE 3

You can set a new password. To change an account password, first select Admin

or User followed by clicking on the "Change Password" button, you will enter the

following page to change the password (Figure 3).

Web GUI

FIGURE 2