A-Neuvideo ANI-62HDRH Руководство по эксплуатации - Страница 16

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор A-Neuvideo ANI-62HDRH. A-Neuvideo ANI-62HDRH 20 страниц. 4k uhd+ hdr 6x2 hdmi matrix w/audio de-embedding

Печатать страницу

NEUVIDEO

WebGUI Control

• Settings: This tab allows for control over each inputs HDCP mode as well as configuration of all (6) routing presets.

The HDCP mode for each input may be switched between the "Standard" and "Apple" modes. "Apple" mode allows for the

display of non-HDCP required content from Apple, and similar, devices on non-HDCP displays.

NOTE: Changes to the HDCP mode may result in a brief blanking of the video signal.

All (6) routing presets may be set here as well. Select the preferred video source (or "Masked" for a blank video signal with no

audio) for each output to be recalled when the specified preset is activated.

• Network/FW Upgrade: This tab provides control over the unit's network settings as well as providing a simple way to update the

unit's firmware, if necessary.

The Address Type dropdown allows selection between Static IP (manual configuration) or DHCP (automatic IP configuration)

modes. When in STATIC mode the IP address, netmask and gateway can be defined manually. The HTTP and Telnet ports can

also be changed from their defaults here. After making any changes, please press "Save" to store the new settings in the unit. If

the IP address has been changed, it will be necessary to re-connect to the WebGUI using the new IP address.

The Firmware Upgrade section of this tab provides a way to easily update the firmware of the unit.

• BROWSE: Click the "BROWSE" button to select the firmware update *.bin file which is located on your local PC.

• UPDATE: Click the "UPDATE" button to begin the firmware update process.