AEG 2060 D Инструкции по эксплуатации и установке - Страница 7

Просмотреть онлайн или скачать pdf Инструкции по эксплуатации и установке для Вентиляционная вытяжка AEG 2060 D. AEG 2060 D 20 страниц. Electrolux cooker hood operating and installation instructions 2060 d
Также для AEG 2060 D: Руководство по эксплуатации и установке (19 страниц), Руководство по эксплуатации и установке (19 страниц)

LED Indicator lights for veryfying the

saturation of filters

This hood is supplied without a charcoal filter. If the hood is to be used

in the recirculation mode with a charcoal filter, the saturation indicator

must be activated as follows:

Depress and hold the A and B buttons simultaneously for 3 seconds.

Initially only the LED indicator signal for the grease filter C is activated,

shortly after the LED indicator for the charcoal filter D will activate, at

this point the saturation detection has been enabled.

To switch off the saturation detection : depress and hold the A and B

buttons for 3 seconds until the LED indicator for the active carbon filter

is flashing.

Led – Indicator for grease filter C

The LED indicator for the grease filter will flash when it requires

cleaning.

Follow the maintenance instructions.

Led - indicator for charcoal filter D

The LED indicator for the charcoal filter illuminates when the filter

requires replacing.

This occurs after about 160 working hours from when the active carbon

filter was first put into operation.

After cleaning or replacing the filter depress and hold the G and H

buttons again for 3 seconds until the grease filter LED or the charcoal

LED are no longer flashing.