Kohler 10109 Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Сантехническая продукция Kohler 10109. Kohler 10109 2 страницы. Handspray with hose

INSTALLATION INSTRUCTIONS

16364

16366

BEFORE YOU BEGIN

All information is based on the latest product information available at the time of publication. Kohler Co.

reserves the right to make changes in product characteristics, packaging, or availability at any time without

notice.

Please leave these instructions for the consumer. They contain important information.

NOTES:

1. Flush the water supply pipes thoroughly to remove debris before installation.

2. The highest working pressure for handspray & shower head is 0.5MPa(5 bar). If it exceeds 0.5MPa(5 bar),

a pressure reducer is needed. The highest water and environment temperature is 60 ºC. Please keep

handspray, shower head and the shower arm away from heater, or it may become damaged and cause injury

to the user.

ROUGH-IN DIMENSIONS

G1/2˝

16364

INSTALLATION

Filter washers(1) provided with shower hose(2) must be installed in

each end of hose(2). For 16366/10377, put the washer(4, thickness 5mm)

instead of washer(1) at the end which connect to the handspray.

For 37432,

Put the check valve(5) into the handspray(3) inlet. Put the

restrictor(6) into the handspray inlet if needed.

Note: Keep the O-ring of the check valve outward.

Connect shower hose to handspray(3) and the water supply.

1069818-2A-B

10377

10109

G1/2˝

37432

16366

37432

HANDSPRAY WITH HOSE

G1/2˝

10377

Handspray with Hose

G1/2˝

10109

G1/2˝