A-Neuvideo HD-44G Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор A-Neuvideo HD-44G. A-Neuvideo HD-44G 20 страниц. Ethernet (tcp) set up
Также для A-Neuvideo HD-44G: Руководство по эксплуатации (20 страниц), Руководство по эксплуатации (6 страниц)
Печатать страницу
IR RECEIVER:
1. SB-100
IR 300M Receiver
SB-100
IR Receiver Set
2. SB-100C
IR 2M Receiver
IR Receiver cable 6ft (2M)
SB-100C
IR Receiver Cable
*** When you plug the External IR extender into the switcher, the front panel IR receiver remains active. ***
PIN CONFIGURATION:
SB-100 and SB-100C Receiver Pin configuration
SB-100
IR Receiver Set
SB-100
Maximum Distance ~ 984 feet (300 meters)
IR Receiver cable 6ft (2M)
SB-100C
IR Receiver Cable
SB-100C Maximum Distance ~ 6 feet (2 meters)
Note: The External IR jack has voltage on the "Ring" portion of a 3-conductor plug. You must use a 3-conductor plug
(aka: stereo plug). Using a 2-conductor plug will short out the power supply. Always make connections with the
switcher power off.
IR EXTENDER
Device
R S -232
IR E XT. in
RS - 232
IR EXT .
Device
R oHS /95/E C
R S -232
IR E XT. in
RS - 232
IR EXT .
Tip: Signal
Ring
Tip
Ring :VCC
Sleeve: GND
Sleeve
Tip: Signal
Ring
Tip
Ring: NC
Sleeve: GND
Sleeve
Cable (3C)
R oHS /95/E C
INP UT
DC 12V
SB-100 Maximum Distance ~ 984 feet (300 meters)
Cable (3C)
INP UT
DC 12V
SB-100C Maximum Distance ~ 6 feet (2 meters)
Sleeve
Ring
Tip (center)
Sleeve
Ring
Tip (center)
11
IR Receiver (SB-100)
IR Rx
SB-100
IR Receiver (SB-100C)
IR Rx
SB-100
VCC (Ring)
Signal (center)
Signal (center)
GND (Sleeve)
GND (Sleeve)