A-Neuvideo ANI-705WPT Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Передатчик A-Neuvideo ANI-705WPT. A-Neuvideo ANI-705WPT 8 страниц. Hdmi over single cat5e/6/7 wall-plate transmitter

Печатать страницу

NEUVIDEO

Front & BACK Panels

RS-232 IN:

Connects to a PC/laptop or RS-232 control system with D-sub 9-pin male cable for the transmission of RS-232 commands.

POWER LED:

This LED will illuminate when the transmitter is connected to a power supply.

IR 2 EXTENDER:

Connects an IR Extender cable for IR signal reception. Signals received will be transmitted from any IR blaster

connected to the receiver unit. Ensure that the remote being used is within the direct line-of-sight of the IR Extender.

IR 1 BLASTER:

Connect an IR Blaster cable for IR signal transmission. IR signals received by an IR extender connected to the

receiver unit will be transmitted by this blaster. Place the IR Blaster in direct line-of-sight of the equipment to be controlled.

LINK LED:

This LED will illuminate when both the source connected to the transmitter and the display connected to the receiver are

connected.

LAN:

Connects to an active network for LAN serving and Telnet/Web GUI control. When the transmitter or any compatible LAN

equipped receivers are connected to a network, this allows the network access (including internet access if available) to be shared

between the transmitter and connected receiver. Connect any Ethernet equipped device e.g. a Smart TV or games console to the LAN

port of a receiver for that device to share the network/internet access.

HDMI IN:

Connects to an HDMI source device such as a DVD or Bluray player.

DC 24V:

Connects the 24 V DC power supply to the transmitter and plug the adaptor into an AC outlet.

CAT5e/6/7 OUT:

Connects to the receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.

HARDW ARE DESCRIPTION