AEG TSCH Руководство по эксплуатации и установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Вентиляционная вытяжка AEG TSCH. AEG TSCH 16 страниц.

Maintenance and cleaning

Before doing any maintenance work on the hood, disconnect it

from the main supply by disconnecting the plug from the wall

socket or unscrewing the fuse.

Cleaning the hood

Clean the outside of the hood using a damp cloth and a mild detergent.

Never use corrosive, abrasive or flammable cleaning products.

Cleaning the grease filters

Clean the filter every month or every

other month according to how much

the hood is used. The cleaner the

filters, the more grease they collect.

Remove the filters by (Fig. 3):

Push the handle towards the rear

of the hood.

Pull the filter down at the front

and remove it forwards.

The filter is made of aluminium wires

on which the grease collects. Clean

the filter in hot water using a detergent,

or in a dishwasher. Let the filter dry

before putting it back. Note that a

dishwasher may discolour the filter.

Changing and cleaning the carbon filter

Only applicable for recirculation. The carbon filters absorb smells and

odours.

Unlike other carbon filters, the LONGLIFE carbon filter can be cleaned and

reactivated. At normal use the filter should be cleaned every second month.

The best way to clean the filter is in the dishwasher. Use normal detergent and

choose the highest temperature (65º C). Wash the filter separately so that no

food parts gets stuck on the filter and later causes bad odours. To reactivate

the carbon, the filter should be dried in an oven for 10 minutes with a

temperature of maximum 100º C.

The KFL 60/80 carbon filter can not be reactivated, it has to be changed after

6-8 months of normal use.

Fig. 3