Kohler VEIL HT200 PNE IWT Руководство по установке - Страница 16
Просмотреть онлайн или скачать pdf Руководство по установке для Сантехническая продукция Kohler VEIL HT200 PNE IWT. Kohler VEIL HT200 PNE IWT 30 страниц. Wall-hung toilet
Печатать страницуA. Method one: Install mask when pressing from top.
Remove top plate, then install the rectangular shield
on the top of the tank, and tighten the screw to fix the
mask to the tank.
A.
B. Methods two and three: During remote installation, fix
the cover onto the tank and pull the air hose to the
panel. Reserve access panel at front or top to ensure
removal and installation of cover.
B.
Method two: During remote plate installation,
7~20mm thickness is recommended for the wall of
the pinch plate and 80 3mm gap is reserved.
Recommended installation hole size of
+2
+2
201
X
136
mm to remote plate installation.
0
0
Method three: During remote installation of mask, 4
holes with diameter of 10mm and depth of 12mm are
needed to be reserved at the locating hose. Drill
10mm holes through air hose on the side of mask.
7~20mm
+2
201
X
0
4
10mm 12mm
1402749-T01-A
80 3mm
+2
136
mm
0
Screw
Pinch plate
Supporting
Board
Air hose
10mm
-9-
Mask
Cover,Top
Cover,Front
Fix Mask Onto Wall
10 Depth 12,
Space reserved
10 12
7~20mm recommended
7~20mm
Finished wall
80 3mm gap reserved
80 3mm
+2
201
0
Cover,Top
Air hose
Finished
wall
78
+2
136
0