Kohler 10-Jet K-1000-H2 Руководство для домовладельцев - Страница 6
Просмотреть онлайн или скачать pdf Руководство для домовладельцев для Сантехника Kohler 10-Jet K-1000-H2. Kohler 10-Jet K-1000-H2 48 страниц. Tower custom hydro-massage system
Также для Kohler 10-Jet K-1000-H2: Руководство для домовладельцев (45 страниц)
Using the Control Keypad
Power On/Off - Turns the power to the keypad, the hydro-massage system pump, and the heater on
and off. Symbols illuminated in blue indicate available modes/features. Modes will be illuminated
in green when operating.
Outer Ring - Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activates Mode Selected Button - After selecting the desired mode using the outer ring, press "OK"
to activate. The active mode then illuminates in green.
Up Arrow - Increases the water flow when either the bodyjets or waterfall is active.
Down Arrow - Decreases the water flow when either the bodyjets or waterfall is active.
Bodyjets Mode - When active, streams of water flow from the bodyjets. You can adjust the water
flow to the bodyjets by pressing the up or down arrows. Rotate the outer ring to select a pair of jets
and press "OK" to turn them on or off.
Waterfall Mode - When active, a continuous stream of water flows from the waterfall. You may
adjust the flow volume by pressing the up or down arrows.
Chromatherapy Cycle - When active, chromatherapy lights will automatically and continuously
cycle through the eight colors; white, violet, indigo blue, aqua blue, green, yellow, orange, and red.
One cycle through all eight colors takes approximately one minute. Press "OK" if you wish the
active color to remain on. Press "OK" again to resume the cycle.
Chromatherapy Specific Color Selection - When active, you may choose to select one specific color.
Press "OK" repeatedly to cycle through the available colors and stop with the color of your choice.
Heater On/Off - The heater automatically engages when the pump is turned on. To turn the heater
off, rotate the outer ring until the heater mode is flashing and press "OK". Press "OK" again to turn
the heater back on. The heater will help maintain the water temperature up to 104° F (40° C).
Indicator Bar - Shows the water flow volume in the various modes.
1030200-5-A
Bodyjet
Waterfall
Mode
Mode
Activates Mode
Selected
Chromatherapy-
Specific Color
Heater
On/Off
Power
On/Off
Chromatherapy
Cycle
Lighted User Keypad
Increases
Flow
1
Decreases
2
Flow
3
4
Individual
5
Jets
Indicator Bar
6
Kohler Co.