A-Neuvideo ANI-2PIP-LOGO Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 15 страниц. 2x1 hdmi multiviewer
Также для A-Neuvideo ANI-2PIP-LOGO: Руководство по эксплуатации (20 страниц)

Печатать страницу

WebGUI Control

DEVICE DISCOVERY APP:

Please obtain the "Device Discovery" software from your authorized

dealer and save it in a directory where you can easily find it. Connect the unit and your PC/Laptop

to the same active network and execute the "Device Discovery" software. Click on "Find Devices

on Network" and a list of devices connected to the local network will show up indicating their current

IP address.

NOTE: The unit's default IP address is 192.168.1.50.

WEBGUI OVERVIEW:

After connecting to the WebGUI's address in a web browser, the login screen

will appear. Please enter the appropriate user name and password then click "Submit" to log in.

NOTE: The default user name and password is "admin".

By clicking on one of the listed devices you will be

presented with the network details of that particular

device.

• IP MODE: If you choose, you can alter the static IP

network settings for the device, or switch the unit into

DHCP mode to automatically obtain proper network

settings from a local DHCP server. To switch to DHCP

mode, please select DHCP from the IP mode drop-

down, then click "Save" followed by "Reboot".

• WebGUI Hotkey: Once you are satisfied with the

network settings, you may use them to connect via

Telnet or WebGUI. The network information window

provides a convenient link to launch the WebGUI

directly.

On the left side of the browser you will see the following

menu tabs where all primary functions of the unit are

controllable via the built in WebGUI: Adjustment,

Windows Setup, OSD/LOGO Settings, Chromakey

Setup, Network, and System. The individual functions

will be introduced in the following sections.

WebGUI Control

Clicking the red "Logout" tab will automatically log the currently

connected user out of the WebGUI and return to login page.

INFORMATION BAR:

Across the top of the WebGUI are 5 sections that will always be displayed no

matter which tab has been selected. These sections are: Information-In, Information-Out, Source,

Mode, and Preset/Factory. They provide information about the state of the unit, or control the most

basic functions of the unit.

• INFORMATION-IN: Provides the detected resolution information about the source connected to

each of the HDMI inputs.

• INFORMATION-OUT: Provides the unit's current output resolution as well as listing the current

Window Mode.

• SOURCE: Provides controls for the A/V Mute function and Audio Source selection.

■ A/V Mute: When A/V Mute is enabled, all output will be disabled on the HDMI output.

■ Audio From CH: Select which HDMI input's audio to pass to both the HDMI and analog

outputs.

NOTE: The analog output can only support LPCM 2.0 audio. Bitstream audio will be

automatically muted.

• MODE: Provides controls for changing the Window Mode, swapping window sources, changing

window priority and selecting the input in the "NONE" window mode.

■ Window Mode: Allows selecting the current windowing mode from 4 choices: PIP

(Picture-in-Picture), SBS (Side-by-Side), POP (Picture-outside-Picture) and NONE (Full

screen seamless switcher).

NOTE: The PIP, SBS, and POP modes will each recall their most recently saved window

sizes and positions, not their default arrangements. Changing this setting when Chromakey

is enabled will automatically disable Chromakey

■ Swap: Allows swapping the input channel between the windows in the multi-windowing

modes.

NOTE: Enabling Swap mode will also automatically switch the Priority setting in order to

maintain the existing Window display priority.

mode.