Kohler BodySpa Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Сантехника Kohler BodySpa. Kohler BodySpa 12 страниц. Module bathing system

Печатать страницу

5. CARE AND CLEANING INSTRUCTIONS

A. CLEANING YOUR BODYSPA MODULE

One of the joys of owning a Kohler acrylic BodySpa

module is the ease of cleaning. There are no seams or

tight corners for lime or mildew build-up. As with any

smooth surface, avoid using abrasive cleansers on

your acrylic BodySpa module. Abrasive cleansers will

scratch and dull the surface. It also helps if you wipe out

your BodySpa

module after each use to prevent a

build-up of soap and mineral deposits.

If the surface of your acrylic BodySpa module becomes

dull, you may use an automotive-type rubbing

compound on the unit, followed by a good application of

paste wax.

NOTICE: Risk of product damage. Avoid products

containing the following chemicals, as they will damage

the finish: acetone, ethyl alcohol, amyl or ethyl acetate,

sodium hypochlorite, toluene, phenol. Extreme heat,

such as that generated by cigarettes or portable heaters,

can damage surfaces; do not use such items near your

module.

C. FLUSHING YOUR BODYSPA SYSTEM

Flush your BodySpa system twice a month or more,

depending upon usage. Use the following sequence:

S Fill the bath with hot water to a level 2" above the

suction cover;

S Add 2 teaspoons of a low-foaming dishwasher

detergent, and 4 ounces of household bleach to the

water;

S Run the BodySpa for 5 to 10 minutes. Then shut off

the BodySpa, and drain the water;

S Fill the bath with cold water to a level 2" above the

suction cover, and run the BodySpa for another 5

to 10 minutes. Drain the bath, and wipe it dry with

a soft cloth.

Kohler Co., Kohler WI

B. CLEANING YOUR REMOVABLE SEAT

Clean your removable seat twice a month or more,

depending upon usage.

The seat may be cleaned using a soft cloth and warm

water. Stubborn dirt or stains may require a

non-abrasive cleanser.

Do not use abrasive cleansers or solvents on the

removable seat.

D. FLUSHING YOUR WHIRLPOOL SYSTEM

Flush your whirlpool system (if equipped) twice a month

or more, depending upon usage. Use the following

sequence:

S Adjust the jets fully clockwise so there is no air

induction;

S Fill the bath with hot water to a level 2" above the

highest jets.

S Add 2 teaspoons of a low-foaming dishwasher

detergent, and 4 ounces of household bleach to the

water;

S Run the whirlpool for 5 to 10 minutes. Then shut off

the whirlpool, and drain the water.

S Fill the bath with cold water to a level 2" above the

highest jets, and run the whirlpool for another 5 to

10 minutes. Drain the bath, and wipe it dry with a

soft cloth.

114825-5-

(A)