Kohler C3-520 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Сантехника Kohler C3-520. Kohler C3-520 17 страниц. Smart seat
Также для Kohler C3-520: Руководство для домовладельцев (41 страниц), Руководство по установке (33 страниц), Руководство по установке (17 страниц)

1. Toilet roughing-in requirements and installation tips

1. Distance between installation holes: 136 - 210mm.

2. Distance between installation holes and tank front rim: >20mm.

3. Distance between installation holes and bowl inner rim: <70mm.

4. Distance between installation holes and tank top rim: 460 - 490mm.

5. Bowl inner diameter: 370 - 390mm.

6. The distance between the seat and the plug should be maximum 1 meter.

2. Install an Electrical Outlet

WARNING: Risk of electric shock, fire, or personal injury.

This product must be grounded. Connect only to a dedicated

220V~, 60Hz, 10A circuit protected by Ground-Fault Circuit-

Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB).

It is recommended to use water-resistant socket. Do not use an extension cord

with the product.

NOTE: Follow local codes when determining the electrical outlet location.

Route the electrical and install to a 220V~, 60Hz, 10A GFCI- or ELCB-protected

receptacle.

3. Preparation

Turn off the water supply to the toilet.

Flush the toilet to relieve any pressure from the water supply hoses.

Place a container under the inlet valve to catch any residual water.

Disconnect the water supply hose from the inlet valve.

Remove the existing toilet seat.

1350324-KR01-A

Kohler Co.