AEG LAVATHERM 56740 Руководство пользователя - Страница 22

Просмотреть онлайн или скачать pdf Руководство пользователя для Сушилка AEG LAVATHERM 56740. AEG LAVATHERM 56740 32 страницы. Aeg condenser dryer user manual

Печатать страницу

AEG LAVATHERM 56740 Руководство пользователя

Machine settings

BUZZER permanent off

Water hardness

Water contains, a variable quantity of

limestone and mineral salts of which

quantities vary according to geograph-

ical locations thus varying its conduc-

tivity values.

Relevant variations of the conductivity

of the water compared to those prefixed

by the factory could slightly influence

the residual humidity of the laundry at

the end of the cycle. Your dryer allows

you to regulate the sensitivity of the

drying sensor based on conductivity

values of the water.

Emptying water tank - warning mes-

sage permanent off

When using an external drain for the

condensed water.

Setting

Implementation

1. Turn the programme selector to any programme.

2. Press simultaneously the DELICATE and LONG ANTI-

CREASE buttons and hold down for approx. 5 sec-

onds.

3. The buzzer is by default always off. You can use BUZ-

ZER button to activate or deactivate sound but ma-

chine does not memorize your selection.

1. Turn the programme selector to any programme.

2. Press simultaneously the DELICATE and TIME buttons

and hold down for approx. 5 seconds. The current

setting is on the display:

–

low conductivity <300 micro S/cm

–

medium conductivity 300-600 micro S/

–

high conductivity >600 micro S/cm

3. Press the START PAUSE button sequentially until you

set desired level.

4. To memorize setting press simultaneously the DELI-

CATE and TIME buttons or turn knob to OFF position

1. Turn the programme selector to any programme.

2. Press simultaneously the LONG ANTI-CREASE and

TIME buttons and hold down for approx. 5 seconds.

The current setting is on the display:

–

- led warning is permanently off

–

- led warning is activated

By default the warning led is activated and is lighting

always at the end of the drying cycle or during the cycle

if the water container is full.