AEG LAVATHERM M8C952BS Руководство пользователя - Страница 19
Просмотреть онлайн или скачать pdf Руководство пользователя для Сушилка AEG LAVATHERM M8C952BS. AEG LAVATHERM M8C952BS 48 страниц.
Печатать страницу
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
10.5 Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
11. TROUBLESHOOTING
Problem
The tumble dry-
er does not op-
erate.
Unsatisfactory
drying result.
Possible cause
1)
The tumble dryer is not connected
to the mains supply.
The door is open.
The On/Off (Marche/Arrêt) button
was not pushed.
The Start/Pause (Départ/Pause)
button was not touched.
The appliance is in standby mode.
Incorrect programme selection.
The filter is clogged.
Dryness (Séchage) option was set
iron dry (prêt à repasser) .
to
The load was too large.
The airflow slots are clogged.
There is some dirt on the humidity
sensor in the drum.
The dryness level was not set to
the desired level.
The condenser is clogged.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion.
10.6 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
Connect it to the mains socket.
Check the fuse in the fuse box (do-
mestic installation).
Close the door.
Push the On/Off (Marche/Arrêt)
button.
Touch the Start/Pause (Départ/
Pause) button.
Push the On/Off (Marche/Arrêt)
button.
Select a suitable programme.
Clean the filter.
Change Dryness (Séchage) option
to a higher level.
4)
Do not exceed the maximum load
size.
Clean the airflow slots at the bot-
tom of the appliance.
Clean the front surface of the
drum.
Adjust the dryness level.
Clean the condenser.
ENGLISH
19
Remedy
2)
3)
5)
3)