AEG TR737L2B Руководство пользователя - Страница 13
Просмотреть онлайн или скачать pdf Руководство пользователя для Сушилка AEG TR737L2B. AEG TR737L2B 32 страницы.
Печатать страницу
1) Default selection which is related to the pro‐
gramme
6.2 + Anti-kreuk
Extends up to 120 minutes the anti-
crease phase (30 minutes) at the end of
the drying cycle. After drying phase drum
rotates from time to time to prevent
creases. Laundry can be removed during
the anti-crease phase.
6.3 Eindsignaal
The acoustic signal sounds at the
following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always
on. You can use this option to activate or
deactivate the sound.
6.4 Droogtijd
For: Katoen, Beddengoed XL, Synthetica
and MixDry programs. Lets the user to
set drying time from minimum 10 min to
maximum of 2 hours (in 10 min steps).
When this option is maximum, load
indicator disappears.
7. BEFORE FIRST USE
Rear drum locks are
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
It is highly recommended
to start any programme for
the first time without the
load for a few seconds to
ensure that the rear drum
locks are removed
properly.
To unlock the rear drum locks:
ready to store - cupboard
1)
dry level
ready to store - extra dry
level
The cycle lasts as long as
set drying time regardless of
the size of a load and its
dryness.
TIME DRYING RECOMMENDATION
up 10
action of cool air only (no heat‐
min
er).
additional drying to improve dry‐
10 - 40
ness after previous drying cy‐
min
cle.
full drying of the small laundry
> 40
loads up to 4 kg, well spun
min
(>1200 rpm).
6.5 Startuitstel
Lets to delay the start of a
drying program from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying program and options.
2. Touch Startuitstel button again and
again.
Time of delay is on the display (e.g.
if the program has to start after 12
hours.)
3. To activate Startuitstel option, touch
the Start/Pauze button.
Time to start decreases on the display.
1. Switch on the appliance.
2. Set any programme.
3. Press the Start/Pause button.
Drum starts to rotate. Rear drum locks
are automatically deactivated.
If the drum still does not
rotate, please release the
rear drum locks manually (to
do that, please use provided
key).
ENGLISH
13