Kohler Symbio K-1336-H Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Сантехника Kohler Symbio K-1336-H. Kohler Symbio K-1336-H 32 страницы. Bath whirlpool

Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start
installation. If you encounter any installation or performance problems, please don't hesitate to contact us. Our
phone numbers and website are listed on the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the piping or
pump for structural support of the whirlpool.
We recommend this whirlpool for corner installation.
-
Inspect the whirlpool for damage before you begin installation.
-
You must install this whirlpool to an adequately supported, level subfloor.
-
Confirm adequate support for a rim mounted faucet; large faucets that may be inadvertently used as a means of
-
support are not appropriate or safe for this installation.
You must have all required components (whirlpool, receptor/bench, apron, and/or end panel) at the job site
-
before beginning the installation.
Do not tighten hardware or secure the nailing in flanges until instructed to do so.
-
If you are combining this whirlpool with a receptor, bench, apron, and/or end panel, be sure to follow the
-
proceeding order of installation.
1. Attach the bench (if used) to the receptor, and install the receptor.
2. Install the whirlpool, and attach to the receptor.
3. Install the end panel to the whirlpool.
4. If used, install the optional apron to the whirlpool.
5. Tighten all the hardware, and secure the flanges.
6. Install the shower door to the receptor.

Recommended Tools and Materials

Silicone Sealant
Measuring Tape
Safety Glasses
Pipe Wrench
Kohler Co.
Pencil
Tin
Snips
Level
3
Plus:
Conventional Woodworking tools
and materials
Drop cloth
Construction adhesive (optional)
Cement or mortar (optional)
2x4's
Carpenter's
Square
A
1012312-2-