Kohler Clearflo K-7161 Инструкции по установке - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке для Ванны Kohler Clearflo K-7161. Kohler Clearflo K-7161 4 страницы. Bath drains
Также для Kohler Clearflo K-7161: Руководство по установке и уходу (24 страниц), Руководство для домовладельцев (21 страниц)

Assemble the handle to the overflow hood with the screw

provided. It may be necessary to adjust the handle to the

desired position.

Insert the drain stopper into the drain ell.

The drain stopper should rise approximately 3/8" (1cm)

above the strainer. To adjust the stopper height, remove

the stopper and loosen the nut below the stopper. Raise

the stopper by turning counterclockwise, or lower by

turning clockwise.

If sufficient clearance cannot be obtained by adjusting the

stopper, remove the lift rod assembly. Loosen the screw,

and slide the adjusting block up on the adjusting rail to

increase the clearance, or down to decrease the

clearance. Tighten the screw, and insert the lift rod

assembly back into the overflow ell.

113176-2-

Fig. #10

Fig. #11

Toggle

Fig. #12

Adjusting Block

Adjusting Rail

Fig. #13

Handle

Overflow

Hood

Stopper

Nut

Lift Rod

Assembly

Screw

Kohler Co., Kohler, WI U.S.A.