Kohler K-11344 Руководство по установке и уходу - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке и уходу для Ванны Kohler K-11344. Kohler K-11344 45 страниц. Freestanding bath
Также для Kohler K-11344: Руководство по установке и уходу (28 страниц), Руководство по установке (25 страниц), Руководство по черновой отделке (4 страниц)
Печатать страницу
Product Information (cont.)
NOTICE: Keep the area around the blower motor clean and free of sawdust, insulation, dirt, or other
small loose debris. Such material could plug the blower motor air intake and reduce the air flow through
the blower.
Connections and Service Access
Before installation, ensure proper access to the final connections.
NOTICE: Provide generous, unrestricted service access to the blower. Before installation, ensure that
there is a proper access to the blower motor and final connections. If the blower motor is installed in an
enclosed area, an access panel is required at the blower motor. This panel should be 18" (457 mm) wide
and 14" (356 mm) high minimum.
Tools and Materials
Adjustable
Wrenches
Sealant
Before You Begin
NOTICE: The blower motor and the check valve must be relocated together. Do not relocate one
without the other.
Bath Information
IMPORTANT! To ensure a successful installation, install the bath on a level finished floor.
IMPORTANT! This product requires a K-7219 drain for proper installation.
• Observe all local plumbing and building codes.
• Unpack and inspect the bath for damage. Return the bath to the carton until installation.
• To simplify future maintenance, make sure all plumbing connections around the bath are easily
accessible.
• This installation is designed to be performed by a professional plumber or contractor.
• A minimum of two people are needed to perform this installation.
• Traditional wood floors and special floating floors are recommended finished floor materials for this
bath installation.
• Provide a minimum of 1800 lbs (816.5 kg) floor support under the bath.
• This bath is designed for a freestanding installation only.
• Select fasteners and the drilling method based on the type of floor the bath will be attached to.
• This bath conforms to CSA B45.5/IAPMO Z124. All dimensions are nominal.
Kohler Co.
Tape
Pencil
Measure
Drill
Drill Bits
Level
Blade
Screwdriver
Plus:
• Conventional woodworking tools and materials
• Drop cloth
• Fasteners
• Hacksaw
• Metal shims
• Rags
• Saw Horses
3
Keyhole/Compass
Saw
1220597-2-A