Kohler riverbath K-1397 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Ванны Kohler riverbath K-1397. Kohler riverbath K-1397 12 страниц.

Kohler riverbath K-1397 Руководство пользователя

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
WARNING: When using this unit, always
follow basic precautions, including the
following:
DANGER: Risk of personal injury. To reduce
the risk of injury, do not permit children to use
this unit unless they are closely supervised at all
times.
DANGER: Risk of personal injury. Hot
whirlpool baths can put certain stresses on the
body, as does any hot bath, shower, sauna, or
steam bath. Prolonged immersions in hot
water may induce hyperthermia. Symptoms
of hyperthermia include an increase in the
internal body temperature, dizziness, lethargy,
drowsiness, and fainting. The effects of
hyperthermia include (1) failure to perceive
heat, (2) failure to recognize the need to exit the
bath, (3) unawareness of impending hazard, (4)
fetal damage in pregnant women, (5) physical
inability
to
exit
unconsciousness resulting in the danger of
drowning. Warning – The use of alcohol,
drugs, or other medication can greatly
increase the risk of fatal hyperthermia.
Use this unit only for its intended use as described
in this manual. Do not use attachments not
recommended by Kohler Co.
Do not operate this unit without the guards (covers)
on the suction fittings.
Never drop or insert any object into any opening.
IMPORTANT! Flush your whirlpool system twice a
month or more depending upon usage, as
described on Page 7.
Keep small objects such as bath toys and bathing
accessories out of the whirlpool while the whirlpool
is running.
Repeated use of personal care products containing
oils can damage plastic whirlpool components. Do
not use heavy, vegetable-based shampoos or bath
oils.
Identify and record the model and serial numbers below (found near the whirlpool pumps):
Model No.
BD
117198-5-
SAVE THESE INSTRUCTIONS
SHOCK, OR INJURY TO PERSONS
the
bath,
and
(6)
Serial No.
The unit must be connected only to supply circuits
that are protected by Ground-Fault
Circuit-Interrupters (GFCI's). Such GFCI's should be
provided by the installer and should be tested on a
routine basis.
To test the GFCI's, push the test buttons. The
GFCI's should interrupt power. Push the reset
buttons. Power should be restored.
If the GFCI fails to operate in this manner, the GFCI
is defective. If the GFCI interrupts power to the bath
without the test button being pushed, a ground
current is flowing, indicating the possibility of an
electric shock. DO NOT use this hydro-massage
bath. Disconnect the hydro-massage bath and have
the problem corrected by a qualified service
representative before using.
To reduce the risk of electric shock, connect only to
properly grounded, grounding type receptacles,
protected by Ground-Fault Circuit-Interrupters
(GFCI's). Do not remove the plugs' ground pins. Do
not use grounding adapters.
A pressure wire connector is provided on the exterior
of the pumps or controls within this unit to permit
connection of bonding conductors between this unit
and all other exposed metal in the vicinity, as needed
to comply with local requirements.
Whirlpool hydro-massage action can cause even a
small amount of bubble bath, bath soap, shampoo,
or bath oil to foam excessively. Refrain from using
these products during whirlpool operation.
Exercise extreme caution if you walk or move around
in the whirlpool, particularly if the whirlpool is
running. Acrylic surfaces are inherently slippery
when wet.
Do not allow the water temperature in the whirlpool
to exceed 104_ F (40_ C).
Your new whirlpool has been listed by Underwriter's
Laboratories, thus ensuring safety for you and your
family. Your new whirlpool also conforms to rigid
ANSI and IAPMO standards set within the plumbing
industry.
2
Kohler Co., Kohler WI U.S.A.