Acadia LIVING Инструкции по установке

Просмотреть онлайн или скачать pdf Инструкции по установке для Внутренняя отделка Acadia LIVING. Acadia LIVING 2 страницы. Z frame inside mount 2 sides cafe shutters

Печатать страницу
Step 3: Secure the Light Block
1. Open shutter panels and position the light block on the window sill. The front of the light block
should be flush with the front of the left and right frames. Make sure magnets on panels will latch
onto the magnet catches on the light block.
2.
Once aligned properly, secure the light block with the light block screws provided through each
pre-drilled hole.
Step 4: Install the Plugs
Install the plugs into the frames' pre-drilled plug holes to
complete the look of your shutters.
Maintain Your Shutters
Use a clean dry cloth, feather duster or vacuum with brush attachment to gently remove dust and debris.
To ensure thorough cleaning, wipe the louvers in the open and closed positions.
Do not immerse the product in water and do not use harsh chemicals to clean. This may cause
discoloration and the wood to warp. Ultrasonic cleaning is not recommended. For best results on
Composite Shutters, use a cotton cloth dampened with water. Polyester cloths tend to create static,
which can attract dust.
Adjust the Tension System
If over a period of time the louvers on your shutters should loosen or not
function properly, a built-in tension system can be adjusted. Simply open the
panels fully and find the tension adjuster screw hole on the side of each panel.
Use a screwdriver to gently turn the screw on each side of the panel to your
desired resistance level. Repeat process for other panel(s) if necessary.
Lifetime Limited Warranty
All Acadia Living shutters have a lifetime limited warranty and will be free from defects in materials or
workmanship for as long as the original retail purchaser owns the shutters, provided that such products
were properly installed in residential dwelling; and such products were made or assembled exclusively
from original materials and components. Any resale or other transfer of the product and/or materials
voids this warranty.
For a complete copy of this warranty, please contact customer service by phone or email.
Customer Service
Phone: 855.667.6261
Light Block
Tension
Adjuster
Version 37103-65200
Shutter Installation Instructions
Z Frame Inside Mount 2 Sides Cafe Shutters
CONGRATULATIONS on purchasing the finest shutters in the market.
You can take pride that your purchase will enhance the function and beauty of your home.
INSTALLATION OVERVIEW
Getting Started
Step 1: Assemble Frame
Step 2: Attach the Panels
Step 3: Secure the Light Block
Step 4: Install the Plugs
IMPORTANT: Do not mix panels or frames from other windows. Install one shutter at a time.
Getting Started
Remove the shutter from the package. Do not discard any of the packaging material until the
shutter operates to your satisfaction. Check the diagram below to make sure you have the
necessary parts.
Z Frame
Hinge
Pins
Light Block
Z Frame Inside Mount 2 Sides Cafe Shutter
Screws for L bracket
(30mm) (if applicable)
Light Block Screws
+
Screws for L bracket
Hinge Pins
(30mm) (if applicable)
Frame Screws
1" T-post with panel
Installation Video
Scan the QR code with
your smartphone to
follow along with video
instructions.
Shutter
Panel
Hinge
Pins
Hinge Screws
+
L Bracket (30mm)
for T-post without top/bottom
frame (if applicable)
Hinge Screws for
folds include RTL
Hinge Spacers
(if applicable)
Plug