Kohler Command PRO ECV630 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Двигатель Kohler Command PRO ECV630. Kohler Command PRO ECV630 21 страница. Vertical crankshaft
Также для Kohler Command PRO ECV630: Руководство пользователя (8 страниц)
Печатать страницу
Air Cleaner
Oil
Cooler
Spark
Plug
Fuel Filter
(Special EFI)
Oil
Filter
Figure 1. Control and Service Point Locations.
Engine Identification Numbers
When ordering parts, or in any communication
involving an engine, always give the Model,
Specification, and Serial Numbers of the engine.
The engine identification numbers appear on a decal
(or decals) affixed to the engine shrouding. Include
letter suffixes, if there are any.
Emission Compliance Period
The Emission Compliance Period referred to on the
Emission Control or Air Index label indicates the
number of operating hours for which the engine has
been shown to meet Federal and CARB emission
requirements. The following table provides the
Engine Compliance Period (in hours) associated with
the category descriptor which may be found on the
certification label.
Refer to certification label for engine displacement.
Exhaust Emission Control System for models ECV630,
ECV650, ECV680, ECV730, ECV740, ECV749 is EM,
O2S, ECM, MPI for U.S. EPA, California, and Europe.
EPA
Category A:1000 hours
CARB
4
Oil Fill Cap/
Serial and
Dipstick
Data Label
Fuel
Pump
Oil Drain
Module
Plug
Extended:500 hours
Fixed
Guard
Electronic
Control
Unit
(ECU)
Fuses
(Early
Location)
Spark
Oil
Plug
Drain
Plug
Oil Recommendations
Using the proper type and weight of oil in the
crankcase is extremely important. So is checking oil
daily and changing oil regularly. Failure to use the
correct oil, or using dirty oil, causes premature engine
wear and failure.
Oil Type
Use high quality detergent oil of API (American
Petroleum Institute) service class SJ or higher. Select
the viscosity based on the air temperature at the
time of operation as shown in the Recommended
Viscosity Grades table.
5W-30
°F -20
0
°C -30
-20
-10
Figure 2. Recommended Viscosity Grades Table.
Refer to Maintenance Instructions for detailed oil
check, oil change, and oil filter change procedures.
Retaining
Clips
Retaining
Clips
Kohler 10W-30
10W-30
SAE 30
20
32
40
50
60
80
0
10
20
30
100
40