Kohler 12RESNT Операция - Страница 7

Просмотреть онлайн или скачать pdf Операция для Портативный генератор Kohler 12RESNT. Kohler 12RESNT 48 страниц. Residential/commercial generator sets
Также для Kohler 12RESNT: Руководство по установке (40 страниц)

Печатать страницу

Hazardous Noise

CAUTION

Hazardous noise.

Can cause hearing loss.

Never operate the generator set

without a muffler or with a faulty

exhaust system.

Engine noise. Hazardous noise can

cause hearing loss. Generator sets

not equipped with sound enclosures

can produce noise levels greater than

105 dBA. Prolonged exposure to noise

levels greater than 85 dBA can cause

permanent hearing loss. Wear hearing

protection when near an operating

generator set.

Hazardous Voltage/

Moving Parts

WARNING

Hazardous voltage.

Moving parts.

Can cause severe injury or death.

Operate the generator set only when

all guards and electrical enclosures

are in place.

WARNING

Hazardous voltage.

Backfeed to the utility system can

cause property damage, severe

injury, or death.

If the generator set is used for

standby power, install an automatic

transfer switch to prevent inadvertent

interconnection

standby

normal sources of supply.

TP-6517 4/09

CAUTION

Welding the generator set.

Can

cause

equipment damage.

Never weld components of the

generator

set

disconnecting the battery, controller

wiring harness, and engine electronic

control module (ECM).

Grounding electrical equipment.

Hazardous

voltage

severe injury or death. Electrocution

is possible whenever electricity is

present. Ensure you comply with all

applicable

codes

Electrically ground the generator set,

transfer switch, and related equipment

and electrical circuits. Turn off the main

circuit breakers of all power sources

before servicing the equipment. Never

contact electrical leads or appliances

when standing in water or on wet

ground because these conditions

increase the risk of electrocution.

Welding on the generator set. Can

cause severe electrical equipment

damage.

Before welding on the

generator set perform the following

steps: (1) Remove the battery cables,

negative (--) lead first. (2) Disconnect

all engine electronic control module

(ECM) connectors. (3) Disconnect all

generator set controller and voltage

regulator circuit board connectors.

(4) Disconnect the engine battery-

charging

alternator

(5) Attach the weld ground connection

close to the weld location.

Connecting the battery and the

battery charger. Hazardous voltage

can cause severe injury or death.

Reconnect

the

positive to positive and negative to

negative, to avoid electrical shock and

damage to the battery charger and

battery(ies).

electrician install the battery(ies).

and

severe

electrical

without

first

can

cause

and

standards.

connections.

battery

correctly,

Have

qualified

Short

circuits.

voltage/current can cause severe

injury or death. Short circuits can

cause bodily injury and/or equipment

damage.

Do not contact electrical

connections with tools or jewelry while

making

adjustments

Remove all jewelry before servicing the

equipment.

Electrical backfeed to the utility.

Hazardous backfeed voltage can

cause severe injury or death. Install

a transfer switch in standby power

installations to prevent the connection

of standby and other sources of power.

Electrical

backfeed

into

electrical system can cause severe

injury or death to utility personnel

working on power lines.

WARNING

Airborne particles.

Can

cause

severe

blindness.

Wear protective goggles and clothing

when using power tools, hand tools,

or compressed air.

Heavy Equipment

WARNING

Unbalanced weight.

Improper lifting can cause severe

injury or death and equipment

damage.

Do not use lifting eyes.

Lift the generator set using lifting bars

inserted through the lifting holes on

the skid.

Safety Precautions and Instructions

Hazardous

repairs.

utility

injury