Kohler ALEUTIAN K-K-24203T-PD1 Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Внутренняя отделка Kohler ALEUTIAN K-K-24203T-PD1. Kohler ALEUTIAN K-K-24203T-PD1 6 страниц. Bathroom cabinet
Печатать страницу
5. Set the washbasin cabinet onto the wall bracket. Be sure
the cabinet adjusted level and the back board of cabinet
appressed to the wall by adjusting the screws of wall clips.
See Fig.5.
1
6. Mark the wall through two holes at the corresponding
positions as illustrated in Fig 6.
7. Dismount the washbasin cabinet and put aside. Drill holes
at the marked position.
Caution!
Avoid the cables and pipes inner set when
drilling in the wall.
Note:
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and plugs.
8. Insert the plugs into the wall.
9. Take out the middle leg and screw from the hardware pack.
Align with the hole on the bottom board and fix the middle
leg, as shown in Fig.7.
10. Set the washbasin cabinet onto the brackets. Be sure the
cabinet adjusted level and the back board of cabinet
appressed to the wall by adjusting the screws of wall clips.
See Fig.5.
11. Apply a washer to the screw before tighten it. Make sure
the washbasin cabinet has been fixed firmly on the wall.
See Fig.8.
8
Fig.6
6
1374323-T01-A
2
MAX1
Fig.5
Fig.7
-4-
5.
3
5
6.
6
7.
8.
9.
7
10.
11.
8
7
5
4
8
Fig.8
8
5