Kohler K-3089 Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Внутренняя отделка Kohler K-3089. Kohler K-3089 29 страниц. Mirrored cabinet
Также для Kohler K-3089: Руководство по установке (36 страниц), Руководство по установке (32 страниц), Руководство для домовладельцев (16 страниц)

"Z" Mounting Bar

#10 x 2" Screw

4. Installing the "Z" Mounting Bar(s) and Top Clips

- Each cabinet is shipped with an aluminum Z" mounting bar which will be mounted to the wall to support the

weight of the cabinet. The bar should be installed in the center of the bottom header.

- Use a pencil to mark the wall where the bottom of the cabinet will be located. Using a level, draw a horizontal line

the length of the mounting bar. If installing multiple cabinets side by side, use a level to draw horizontal lines for

each Z" mounting bar.

- Drill a minimum of three evenly spaced 7/32" holes into the Z" mounting bar through the indentations (holes

should correlate to a stud behind the wall if no header was installed).

- Place the bottom edge of the Z" mounting bar against the horizontal line. Use the #10 x 2" pan head thread cut

screws to secure the Z" mounting bar to the wall.

NOTE: Use the plastic anchors supplied if no header was placed in the wall. Make sure each Z" mounting bar

has a minimum of three anchors per cabinet.

- Locate the three top clips for the cabinet and slide the clips into the groove located in channel on the top side of

the cabinet. Do not lift cabinet to wall until instructed.

1010988-2-

Do not lift cabinet to wall until instructed

Top Clip

Groove in

Channel

Kohler Co.