Aqua Computer poweradjust 3 Руководство по эксплуатации и установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Контроллер Aqua Computer poweradjust 3. Aqua Computer poweradjust 3 20 страниц. Usb unit is a high power fan or pump controller for pcs

Печатать страницу

aqua

computer

5. 5. 5. 5. Electrical connections

Electrical connections

5.1. Connector overview

ATTENTION: Completely turn off your power supply or disconnect the mains pow-

er cord from the wall outlet before connecting or disconnecting any cables to/from

the device!

Please refer to the following chapters for details on the individual connectors.

5.2. Power supply

Connect a power plug of your PC's power supply unit to this connector. Do not

use excessive force but double check the polarity of the plug if you are having

trouble to connect.

Pin assignment:

Pin 1: +12 V

Pin 2: GND

Pin 3: GND

Pin 4: not connected

5.3. Power output (fan or pump connector)

Regulated fan/pump output with speed signal processing. Maximum current at 12

V is 2.5 A (30 Watts total power), with optional heat sink (not included in delivery)

3.0 A / 36 Watts. The poweradjust 3 features temperature monitoring to prevent

damage to the poweradjust 3 controller board. If the internal electronics tempera-

ture sensor reading exceeds approximately 80 °C, the power output is set to 100

% power to minimize power dissipation. If the sensor reading rises further to ap-

proximately 100 °C, the power output is set to 0 % power and effectively switched

off. In both cases, the poweradjust 3 controller activates the manual control option

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen

POWERADJUST 3

- 5 -