AvLab DP CyberParallel PCIe Руководство по быстрой установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Адаптер AvLab DP CyberParallel PCIe. AvLab DP CyberParallel PCIe 8 страниц.

Печатать страницу
4.
To install the card, carefully align the card's bus
connector with the selected PCI Express slot on the
motherboard. Push the board down firmly, but
gently, until it is well seated.
5.
Replace the slot bracket's holding screw to secure
the card, then replace the computer cover and
reconnect the power cord.

Driver Installation

This section provides instructions to install the DP
CyberParallel PCIe drivers.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Server
2008 R2
1.
Install the board and boot up Windows.
Note: Windows 7 may automatically search
preconfigured driver folders for the proper driver,
this process may take several minutes to complete.
Do not interrupt this process.
2.
Right click Computer, click Manage, click Device
Manager.
3.
Insert the driver CD. Close the AutoPlay box if
displayed. Right click Base System Device, click
Update Driver Software.
4.
Click Browse my computer for driver software.
5.
Type D:, then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
6.
At Windows has successfully updated your driver
software, click Close.
7.
Right click PCI Parallel Port, click Update Driver
Software.
8.
Repeat steps 4-6 to complete the installation.
3