Aqua Computer cuplex kryos NEXT VARIO Руководство по эксплуатации и сборке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и сборке для Диспенсер для воды Aqua Computer cuplex kryos NEXT VARIO. Aqua Computer cuplex kryos NEXT VARIO 4 страницы.
Печатать страницуaqua
computer
3. Integration into a water cooling system and flow direction
3. Integration into a water cooling system and flow direction
3. Integration into a water cooling system and flow direction
3. Integration into a water cooling system and flow direction
Integrate the cuplex kryos NEXT into a water cooling system of sufficient perfor-
mance. For best cooling performance, the coolant must be supplied through
the central fitting of the cuplex kryos NEXT. Reversed flow direction significantly
decreases cooling performance.
4. Initial operation and approved coolants
4. Initial operation and approved coolants
4. Initial operation and approved coolants
4. Initial operation and approved coolants
Put the water cooling system into operation, but do not connect any other PC
components to the mains supply! Check the cuplex kryos NEXT as well as the
fittings for leakages and do not put your PC into operation unless you can
definitively eliminate the possibility of coolant leaking from the system! If any
component has been in contact with coolant, do not put it into operation be-
fore it is completely dry again! For operating the PC, the cuplex kryos NEXT
must be correctly mounted and be connected to a water cooling system featur-
ing adequate cooling performance! For corrosion inhibition, "Double Protect
Ultra" must be used as coolant!
5. Geometry adjustment of the water block base
5. Geometry adjustment of the water block base
5. Geometry adjustment of the water block base
5. Geometry adjustment of the water block base
The geometry of the base part of cuplex kryos NEXT VARIO variants can be ad-
justed using four adjusting screws on the sides of the water block to perfectly fit
the CPU. Each water block is pre-adjusted to a geometry that performs very
well with a number of CPUs. A laser engraving on the screws marks this preset.
The geometry is to be adjusted while the PC is in operation. Therefore, the cu-
plex kryos NEXT VARIO has to be installed on the CPU and integrated into a
functioning water cooling setup. Use extreme caution while adjusting the water
block and do not touch any motherboard components!
CPU temperature or CPU core temperatures must be monitored while adjusting
the geometry. Examples for suitable software are:
aquasuite version 2017 or higher, tab "Quick data view"
●
"HWiNFO" (REALiX, Freeware, www.hwinfo.com)
●
"Core Temp" (Arthur Liberman, freeware, www.alcpu.com)
●
"Open Hardware Monitor" (Open Hardware Monitor Project, open
●
source/MPL 2.0, www.openhardwaremonitor.org)
"AIDA64" (FinalWire Ltd., subject to license fees, www.aida64.com)
●
Some motherboard manufacturers also provide suitable software.
●
© 2016-2017
Aqua Computer GmbH & Co. KG – Gelliehäuser Str. 1 – D-37130 Gleichen
cuplex kryos NEXT VARIO 04/2017