Aqua Computer TUBEMETER Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары Aqua Computer TUBEMETER. Aqua Computer TUBEMETER 2 страницы.

aqua

computer

Safety instructions and references on the operation:

The black varnish must not be damaged as this might lead to erroneous measurements

and removes any warranties and claims!

The light emitting diode at the tip of the sensor may corrode when in contact with water

and may loose the functionality. This normal chemical reaction does not constitute an

operation error and therefore is not liable for warranty claims.

After a long usage sedimentation may occur on the sensor which could disturb the correct

measurements. In this case the sensor may be carefully cleaned with a soft cloth and clear

running water.

To recognize measurement errors at an early stage, e.g. by staining or damages to the

sensor, the correct functionality of the sensor must be monitored regularly. We accept no

responsability for consequentional damages that occur through incorrect usage!

Installation instructions:

Hand-screw the tubemeter™ in a vacant opening of the aquatube or in the lid of the

aquainlet (fitting lid with G1/8-thread is separately available as an accessory). The narrow

part of the circuit board with the gold-plated measurement surfaces is supposed to be

submerged in the cooling liquid, the connector side must stay dry. To use the maximum

measuring area the sensor should be istalled perpendicular to the water surface. Only

hand-screw the sensor, do not use any tools to fasten it!

Connect the sensor to an available USB-connector of your mainboard (cable included in

delivery) or to an available aquabus-connector (cable not included in delivery) e.g. on the

aquaero™ (not included in delivery).

Device settings:

No settings may be made to the sensor directly. The sensor automatically detects wether it

is connected via USB or the aquabus and configures itself accordingly. All settings are

made with the pc-Software „aquasuite", where the measurements may be interpreted.

Updated versions of the software may be found at

„support" -> „download" area.

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1 – D-37130 Gleichen

Current as of 01/2007

MANUAL TUBEMETER

http://www.aqua-computer.de

in the

Page 2