AAVIX GC-1032 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Металлоискатель AAVIX GC-1032. AAVIX GC-1032 15 страниц.

coil's plug into the search coil jack on the detector's control

housing.

Caution:

Do not over-tighten the search coil or use tools such as pliers to



tighten it.

The search coil's plug fits into the connector only in one way. Do



not force the plug and also do not pull on the cable or you could

damage it.

Stand and stretch your arm, holding the metal detector to make the

search coil above the ground for about 1 to 5 cm. Rotate the stem's

lock nut counterclockwise to tighten it.

INSTALLING THE BATTERIES

Your metal detector is powered by two 9V batteries (not included).

1. Turn off the power before installing the batteries.

2. Slide the left and right battery covers off in the direction of the arrow.

3. Place a 9V battery into the battery compartment matching the polarity

symbols (+ and -) marked inside.

Warning:

Dispose of old batteries promptly and properly. Never bury or burn



them.

Cautions:

Use only fresh alkaline batteries of required size.



Do not mix old and new batteries or different types of batteries.



Do not mix alkaline, standard(carbon-zinc), or rechargeable



(nickel-cadmium) batteries.