AVLink 12S-108 Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель AVLink 12S-108. AVLink 12S-108 2 страницы.
Также для AVLink 12S-108: Руководство пользователя (2 страниц)
Печатать страницу
2. Plug the extension cables from video source device (Ex
Camcorders or Pattern Generator) into the SDI IN port
connectors.
3. Plug the power adapter into the wall socket.
4. Turn on the monitor first.
5. Turn on the Camcorders or Pattern Generator.
Operation
1. Make sure 'POWER' Led turn on when you plug-in AC
adaptor outlet.
2. Make sure 'LOCK LED' turn on when you ready signal
source.
Note:
Please check cable/power when you ready everything but
LOCK LED is off.
Assembly application diagram:
12S-104
12S-108
-3-
DIP Switch List of Settings
12S-104
1
2
ON
OUT1&2 ON
OUT 3&4 ON
OFF
OUT 1&2 OFF
OUT 3&4 OFF
※Factory Defaults to 1&2 ON.
12S-108
1
2
3
OUT
OUT
OUT
1&2
3&4
5&6
ON
ON
ON
ON
OUT
OUT
OUT
1&2
3&4
5&6
OFF
OFF
OFF
OFF
※Factory Defaults to 1~4 ON.
Lock Led List of Colors
COLOR
SDI IN signal
LIGHT BLUE
SD
PURPLE
HD
GREEN
3G
YELLOW
6G
BLUE
12G
Lock Led List of Flashing Speed
Flashing
Always
250(ms)
speed
on
Input SDI
Excellent
Good
Signal Quality
SDI Cable Length
(Belden 1694A)
12Gbps - 70m
6Gbps - 110m
3Gbps - 220m
1.5Gbps - 265m
270Mbps - 530m
Firmware Upgrade:
Micro USB
-4-
1. Connect Power Jack
2. Connect Micro USB
3. Put Bin File in Start Folder.
3
4. Execute Firmware Upgrade.exe
OUT Amp ON
OUT Amp OFF
4
5
OUT
OUT
7&8
Amp
ON
ON
OUT
OUT
7&8
Amp
OFF
OFF
5. Check Link State (Red: Disconnect Green: Connected)
6. Select Bin File
7. Press Confirm to Upgrade
500(ms)
1(s)
Poor
Worse
8. Check Progress Bar value is 100 and Command Success
※
Firmware upload utility software from AVlink's official
website.
© AV LINK GROUP LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
Power
-5-