AVLink HRM-214F Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Медиаконвертер AVLink HRM-214F. AVLink HRM-214F 2 страницы. Hdmi selector 1080p (12bits) or 1200p (8bits)

Печатать страницу
Installation
Before the installation, making sure the selector and
monitor (projector) are turning off.
1. Making sure all equipments are turned off.
2. Plug the monitor cable into the HDMI OUT port
connector.
3. Plug the extension cables from HDMI port of DVD
player/TV receiver into the HDMI IN port connectors.
4. Plug the power adapter into the wall socket.
5. Connect the power adapter with the HDMI selector.
6. Turn on the monitor first.
7. All red LEDs will flash back and forth, otherwise, go
back to check the step 4 and 5.
8. Turn on the DVD player/TV receiver.
9. The LEDs green light turn on while the DVD player/TV
receiver have well been connected and maintaining
the activation.
Operation
1. Port selection
Press the button of "port selection switch" for
accessing the wanted DVD player/TV receiver.
The selected corresponding port will light on for the
red LEDs which indicating the port is actived.
2. IR remote control
Use "1", "2" key to select DVD player/TV receiver
that wanted DVD player/TV receiver.
Use " ", " " key to select another DVD player/TV
receiver.
Use "
" key to power on/off selector.
-3-
Technical Specifications
Input/Output Signal
Pin #
Signal
Pin #
1
TMDS Data 2+
11
2
TMDS Data 2 Shield
12
3
TMDS Data 2-
13
4
14
TMDS Data 1+
5
TMDS Data 1 Shield
15
6
TMDS Data 1-
16
7
17
TMDS Data 0+
8
18
TMDS Data 0 Shield
9
19
TMDS Data 0-
10
TMDS Clock+
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-
Signal
TMDS Clock Shield
TMDS Clock -
CEC
Reserved
(N.C. on device)
SCL
SDA
DDC/CEC Ground
+5 Power
Hot Plug Detect