Aqua Cooler AC-PN8EBFY Руководство по использованию и уходу - Страница 6

Просмотреть онлайн или скачать pdf Руководство по использованию и уходу для Система водоснабжения Aqua Cooler AC-PN8EBFY. Aqua Cooler AC-PN8EBFY 12 страниц. Surface mounted bottle filler

Печатать страницу

INSTALLATION CONT.

Assemble PN8EBFY wrapper to the installed frame. Rest the alcove on the drip tray and ensure

the wrapper walls rest OUTSIDE of the frame and side brackets.

NOTE: The drip tray will hold the weight of the wrapper but it is recommended to keep a

hold on the unit during installation for safety.

If the outer edge of the drip tray is not properly aligned, loosen the screws mounting the filter

support and drip tray bracket to the frame and push forward or back as needed. Then retighten

the screws.

Your Partner in Cool.

INSTALLATION CONT.

Route the insulated cold water out line up into the bottle filler cabinet and connect it to the

solenoid valve located above the alcove.

Connect the IEC connector to the power brick located behind the alcove of the bottle filler. It

is recommended to route the power cord from side opposite of the condenser fan to ensure it

does not become an obstruction.