AAxeon FCM-3312SX Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Медиаконвертер AAxeon FCM-3312SX. AAxeon FCM-3312SX 2 страницы. Gigabit smart diagnostic media converter

Печатать страницу

Trademarks

Contents subject to revision without prior notice.

All trademarks remain the property of their owners.

This publication may not be reproduced as a whole or in

part, in any way whatsoever unless prior consent has been

obtained from owner.

FCC Warning

The OPTOLINX GIGABIT MEDIA CONVERTER has

been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC

Rules. These standards are designed to provide

reasonable protection against harmful interference when

this device is operated in a commercial environment. This

device generate, use, and can radiate radio frequency

energy and may cause harmful interference to radio

communications unless installed in accordance with this

User's Guide. Operation of this device in a residential

area is likely to cause harmful interference in which cases

the user is responsible for taking appropriate remedial

action at his/her own expense.

CE Mark Warning

This is class A products. In a domestic environment this

product may cause radio interference in which case the

user will need to consider adequate preventative

methods.

Checklist

The carton should contain the following items:

OPTOLINX GIGABIT MEDIA CONVERTER

User's guide

Please notify your sales representative immediately if any

items are missing or damaged.

1. Overview

The OPTOLINX GIGABIT MEDIA CONVERTER is

designed to meet the massive needs for Gigabit network

deployment. This solution allows users to extend a copper

based Gigabit network via fiber cable to a maximum

distance up to 30KM.

The OPTOLINX GIGABIT MEDIA CONVERTER is fully

compliant with IEEE802.3z & 802.3ab standards. It can be

installed into a series of FCM-CHS2 Converter Chassis.

The installation & operation procedures are simple &

straightforward. Operation status can be locally monitored

through a set of Diagnostic LED located in the front panel;

or - if installed within a Management Chassis, via network

management system remotely.

Features

100Base-TX and IEEE 802.3ab

10/100/1000Base-TX to 1000Base-FX

Converter

Standard : IEEE 802.3z, 802.3ab & 802.3u

Store and Forward Switching Mechanism

Supports 256K Byte Packet Buffer

Supports Loop Back and Diagnostic Test

Interface: 1 * RJ-45 connector

1 *SX.LX Fiber Optic SC

MDI/MDIX Auto-Crossover supported

LED:

Power , Status, FDX ,Speed

TP Link/ACT, FO Link /ACT

Plug-and-Play installation

Supports SNMP proxy

3. Installation

•

Remove the Converter Chassis front panel protective

plate from the selected installation slot.

•

Carefully slide the converter module into the

Converter Chassis and ensure the converter golden

finger connection with the socket, and rotate the

OPTOLINX GIGABIT MEDIA CONVERTERBTFX

bracket screw into the Converter Chassis

•

Attach fiber cable from the OPTOLINX GIGABIT

MEDIA CONVERTERBTFX fiber port to the fiber

network. The fiber connections must be matched –

transmit socket to receive socket.

•

Attach a UTP cable from the 1000Base-TX network to

the RJ-45 port on the OPTOLINX GIGABIT MEDIA

CONVERTERBTFX

•

Check if the Power LED lights up. The TP Link and FX

Link LED will both light up when all the cable

connections are satisfactory.

RJ-45

Connector

FDX/

Speed

COL

Fiber

Transceiver

PWR

Status

Diag

Fig-1 LED, Connector and Jumper

Gigabit TX

GIGABIT TX

Gigabit Fiber

Network

Fiber Transceive

Fig. 2 Basic Network Connection

PN: 6306X3312000XXX