Dexter Laundry WCVD Series Поиск и устранение неисправностей и коды неисправностей - Страница 10

Просмотреть онлайн или скачать pdf Поиск и устранение неисправностей и коды неисправностей для Стиральная машина Dexter Laundry WCVD Series. Dexter Laundry WCVD Series 18 страниц.

Печатать страницу

Dexter Laundry WCVD Series Поиск и устранение неисправностей и коды неисправностей

Variable Frequency Drive Control

Digital Readout Faults

Fault#

Description

CE1

VFD received an illegal

command. Possible controller

problem

CE2

Illegal data address, VFD

received an address not

available to the controller.

CE3

Illegal data value received

at VFD. Possible controller

problem.

CE4

VFD unable to perform the

requested action. Possible

controller problem.

CE6

Time frame between

commands is to short. Possible

controller problem.

CE9

Internal checksum error. VFD

problem.

CE10

Watch dog timer. Command

not received from the controller

every 6 seconds

CE11

Frame error. Possible Baud

rate issues between VFD and

controller

CE12

Command message is to short.

Possible controller problem

CE13

Command message is to long.

Possible controller problem

CE14

Command message includes

unused characters. Possible

controller problem.

Normal operation of the VFD: VFD display shows operating frequency ﬁ rst very quickly then changes

to F0.0 at time power is returned. This will stay displayed until the VFD receives a command from main

control PCB. (Pushing start button) A CE-10 fault will display at drive if improper communication between

PCB and VFD has occurred.

Note: Resetting a fault code on front of washer: Turn the power off to machine (machine will need to

remain off for up to three minutes ).

SOFT RESET : is accomplished by pushing the white button located on the Main controller PCB board

and simultaneously turning power on to machine. This will reset main controller to factory default

settings.

Please record any modiﬁ ed information that has been inserted in memory before attempting to Soft

Reset the PCB.

CE5, CE7 and CE8—Reserved by DELTA

Part # 8533-074-001 09/13

Customer Action

Reset drive.