Aqua Creek Products PRO POOL-AT F-046QAB-AT Руководство по установке и эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Осветительное оборудование Aqua Creek Products PRO POOL-AT F-046QAB-AT. Aqua Creek Products PRO POOL-AT F-046QAB-AT 7 страниц. Quick-attach anchor

Печатать страницу

LIFT INSTALLATION AND REMOVAL

Once the 4-Point Preset Anchor has been installed and allowed to set for at least 48

hours, the pool lift may be installed and operated. The Quick-Set Anchor Bolts will be

used to fix the lift safely and securely to the pool deck.

STEP 1: Using a hand-truck or the Aqua Creek Products

Transport Cart (F-428HTshown – sold separately) carefully

move the Pro Pool lift to the anchor location. Orient the

anchor-bolt holes in the base-plate of the lift over the four

(4) anchors. Lower and adjust the lift until all four holes

line-up.

STEP 2: P l a c e o n e o f t h e ½ " F L A T WA S H E R S o v e r a n

anchor-bolt hole as shown. Install one of the QUICK-

ATTACH ANCHOR BOLTS into the hole, through the flat

washer.

STEP 3: Hand-tighten the anchor bolt as shown until tight.

Do not be afraid to over tighten, but DO NOT USE A

WRENCH OR LEVERAGE-DEVICE TO TIGHTEN.

Only hand-tighten the bolts, but make sure they are tight.

Repeat steps 2 and 3 for all four bolts.

LIFT REMOVAL: To remove and transport the lift,

reverse steps 1-3. Store the QUICK-ATTACH anchor-bolts

and washers with the lift for easy retrieval.