AVM EVOLUTION CD2 Руководство по эксплуатации - Страница 14

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер AVM EVOLUTION CD2. AVM EVOLUTION CD2 19 страниц. Cd-player evolution

PROGRAMMING

Firstly press the button PROGRAM (23). If the C02 is already playing this will automatically open the sub

menu for selection of the special functions polarity, filter characteristics of the digital filter and the sample

rate of the

D/A

converter ( see special functions below).

If you press the button PROGRAM (23) when the drive has stopped the bottom row of the display shows

"PROGRAMMING" and in the upper row the word "TRACK" together with the actual title number (Track

01). You can now enter the numbers of the selected titles in sequence by pressing the relevant numbered

buttons on the remote control.The button PROGRAM (23) should not be pressed during this procedure.

A maximum of 20 titles can be pre programmed. If this number is exceeded any further entries will not be

processed and the display will show the programmed contents of the memory. For example: if 20 titles have

already been stored an attempt to program a further title will lead to the display of the programmed con-

tents of the first section of the memory.

To select titles with a number greater than 10, firstly press the button cd-select (33) together with the

button> I0 (44) followed by the first number and second number of the selected title. For this purpose the

button 10 (43) represents the number zero "0" . (Example: to select the title numbered "23" press button

cd-select (33) and> I 0 (44) followed by the buttons cd-select (33) with 2 (35) and cd-select (33) with

3 (36).

When a title number has been entered the display will indicate the title number you have chosen for a few

seconds (as two digits in the upper row eg "TRACK 23"). After approximately 5 seconds the upper row of

the display shows the title number currently programmed (45) and to the right of this the playing time in

minutes and seconds (46a) and the remaining programmed titles(46b). If the title number is blinking this

signifies that the C02 a awaiting the entry of the second digit of a two digit title number.

To prematurely discontinue the programmed function press the button STOP.

To delete all pre programmed titles prior to re programming press the button STOP (12,31) followed by

the button PROGRAM (23).

PLAYBACK OF PROGRAMMED TITLES

Once title programming has been completed the playback process can be started by pressing the button

PLAY (10,32). During play the C02 will show "PPLAY" (Program PLAY) instead of "PLAY".

The significance of some of the functions can alter during playback as follows: Title skipping to the previous

or following title follows the sequence of the programmed titles, and not the numerical sequence of the CD.

Fast forward and reverse does not follow the title numbers (e.g. from the end of title 3 to the start of title 4)

but stops at the beginning of every title. Pressing the STOP buttons (12,31) once will end playback without

extinguishing the programming. Pressing the button STOP (12,31) twice will open the CD tray and delete

the programming.