AVM OVATION CD 6.2 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для CD-плеер AVM OVATION CD 6.2. AVM OVATION CD 6.2 19 страниц.
Также для AVM OVATION CD 6.2: Руководство по эксплуатации (19 страниц)
Печатать страницу16 Analogue output left (XLR)
17 Analogue output right (XLR)
18 Analogue output right (Cinch/RCA)
19 Analogue output left (Cinch/RCA)
20 Digital output optical
21 Digital output coaxial
22 USB B digital input
23 Digital input optical 2
24 Digital input optical 1
25 Digital input coaxial 2
1.3 Installation and cooling
The unit can become hot depending on demanded output power or environmental
temperature. Therefore, it is important, that the cooling air can flow unhindered into the air
inlet in the bottom and flow out through the holes in the rear panel. Direct exposure to
sunlight is not recommended because this will heat up the unit and may cause unwanted
malfuctions.
1.4 Connection to mains
Connect the unit to the mains outlet (28) by using the power cord which is (in some countries)
delivered together with the unit. Make sure that mains voltage is according to the value
printed on the rear panel of the amp (near mains connector).
CAUTION: Keep the unit switched off (29) until all audio connections are made.
1.5 Connection to a preamplifier or integrated amplifier
Connect the analogue outputs (16-19) to the high-level inputs of a preamplifier or integrated
amplifier. The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from
each other and can be used independently.
26 Digital input coaxial 1
27 Digital input AES/EBU
28 Mains connector
29 Mains switch
30 Trigger outputs
31 Connector for external IR receiver
32 Phase LED
33 Link
34 Configuration port (updates)
7