A.I.&.E 07R860 Руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Беспроводные наушники A.I.&.E 07R860. A.I.&.E 07R860 13 страниц.

transmitter channel. Each transmitter has its own radio-frequency. Depending on your system, you can
choose between two or three different channels. Select one channel then turn on the transmitter channel
switch. The LED lamp located on the right of connector will light up.
3. When charging rechargeable batteries, put the headphones on the transmitter rack (see diagram). Remove
the transformer jack and connect it to the power plug (DC5.0V/200MA). The red charge lamp will light. If the
volume is faint, has extra noise, and interference becomes stronger, you should either change or recharge
the batteries (if using rechargeable batteries).
4. When not in use, turn off the headphones, transmitter, and connector (Diagram 2).
5. If the unit will not be used for a longer period, remove the batteries to avoid damage from battery leakage or
corruption.
Notes:
1. Do not listen at high volumes for an extended period, to avoid permanent injury.
2. This product is designed to provide stereo sound. If it is to be connected to non-stereo equipment, use a
stereo to mono jack (not included) for the best sound quality.
3. Use a soft cloth to clean the product. Do not use a corrosive cleaner. Furniture polish may damage the
transmitter's rubber pad. To avoid damage to your furniture, place the transmitter on a soft cloth.
Troubleshooting:
1. Ensure all wires are connected correctly.
2. Ensure that the power switch is on and that the volume is at a good level.
3. Keep within range of the transmitter signal. If you are unable to get a signal, you may be too far from the
transmitter.
4. Try selecting a different channel for optimum reception.
5. Different channels can be selected by lightly pressing the channel option button.
6. If the device still will not operate correctly, contact a dealer for assistance.
871125238625.indd 3
19-12-12 14:12