Aqua Lung Calypso Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Aqua Lung Calypso. Aqua Lung Calypso 20 страниц. Second stage
Также для Aqua Lung Calypso: Технический бюллетень (4 страниц), Руководство по эксплуатации (19 страниц), Руководство по техническому обслуживанию (20 страниц)

CALYPSO BC USER'S MANUAL

3.2 Connecting the MP Hose to the First Stage

Disconnect the inflator hose from the quick disconnect (QD) fitting and

set the hose to the side.

Use an appropriate size wrench or hex key, remove the port plug from a

medium pressure port that is located to the left of the port used for the

primary second stage.

Inspect the threaded male fitting of the inflator hose to ensure there is an

o-ring present. Make sure the o-ring is free of any visible signs of debris,

damage or decay.

Screw the male threaded end of the hose into the medium pressure port

to the left of the primary second stage. Tighten the hose with a 9/16"

crowfoot and torque wrench (recommended torque 40 inch-pounds).

To orally inflate your BC (See Fig. 2),

place your lips on the oral inflator mouth-

piece (A) and exhale a small amount of

air into the mouthpiece. This will purge

any water that may be still in the hous-

ing. While continuing to exhale into the

mouthpiece, depress the oral inflator

button (B) to inflate the BC. Immediately

after exhaling, release the oral inflator

button to prevent air from escaping.

For the power inflator to work, the medium pressure inflator hose must be

connected. To connect the MP inflator hose, grip the grooved sleeve (C) with

your thumb and forefinger and slide the sleeve back. Place the hose fitting

over the quick disconnect (QD) fitting (D), and push inward while releasing

the sleeve. Check to ensure the hose is securely attached.

To inflate your BC with medium pressure air, depress the power inflate button

(E). Do not hold the inflator button depressed continuously underwater, as

this could cause you to become excessively buoyant. Instead, depress the

button in short bursts until you become neutrally buoyant.

Figure 2