DFG E-TitanComb Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переплетная машина DFG E-TitanComb. DFG E-TitanComb 5 страниц. Heavy duty binding machine digital finishing group
Печатать страницуDetermine Side Margin (side guide) and Punch Margin (rear back gage)
Picture 4
(EtitanCoil machine showed)
Punching
1. Align sheets and insert edge to be bound into punch throat
2. Push the sheets to flush against the inner wall of punch throat.
3. Push the sheets to be against the side guide
4. Press the foot pedal
You can punch up to 28 sheets of paper (20#) at once. Punch ONLY 6 pieces of 10 mil
PVC covers at a time to prevent jams and excessive wear.
Binding
Tip
Picture 5
.
1260 Kempar, Madison Heights, MI 48071, U.S.A. Phone: 248-733-0400, Fax: 775-587-5352
Email: [email protected] Website: www.dfgus.com
1. Select the punch margin (general
guidance – the thicker the book, the
larger the punch margin. However,
you can use small punch margin for
any thickness of book)
2. Set the side guide to center the
sheet
1. Place a plastic comb-binding element on the
binding head. Please make sure that the tips of
the plastic rings are on the top and pointing away
from you (see picture 5)
2. Pull binding lever forward (towards you) to
open the plastic comb-binding element
3. Align the holes of the punched documents
with the tips of the plastic rings on the binding
element. Load the punched documents vertically
into the open plastic rings of the
binding element. Swing the documents down so
that the plastic rings will enter the punched holes
of the documents.