Bilanciai DD2060 X Series Руководство

Просмотреть онлайн или скачать pdf Руководство для Сенсорные терминалы Bilanciai DD2060 X Series. Bilanciai DD2060 X Series 4 страницы.

EU DECLARATION OF CONFORMITY

(According to Annex IV of the European Directive 2014/31/EU)

1. THE NON-AUTOMATIC WEIGHING INSTRUMENT

TYPE

Serial number

No of the EC type-approval certificate

2. MANUFACTURER

SOCIETÀ COOPERATIVA BILANCIAI CAMPOGALLIANO

Via S. Ferrari, 16 - 41011 Campogalliano MO (ITALIA)

3. This declaration of conformity is issued under the sole responsibility of the manufacturer.

4. Object of the declaration: see 1.

5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

- 2014/31/EU (NAWI): Standard EN 45501:2015

- 2014/35/EU (LVD): Norm EN 60950-1:2006

- 2014/30/EU (EMC): Norm EN 61000-6-3:2007 61000-6-4:2007

7. The Notified Body NMi N°0122 has carried out the con formity of the Production quality assurance assessment

and issued the certificate: CE-251.

8. Additional information:

All the instructions given in the Use and maintenance handbook supplied with the instrument must be followed

during the utilization, as well as the safety and accident-preventing norms in force in the country of installation.

The EC mark has been applied on the product and the supplementary metrology marking consisting of the

capital letter "M".

The instrument is suitable to achieve a weighing system inserted in a complex system, whose design and

overall manufacturing falls into the final responsibility of the manufacturer. If the instrument is placed in an

installation, it is FORBIDDEN to be put into service and placed on the market before the same installation, in

which the instrument is intended to be incorporated, is placed in safe conditions and declared, on the basis of

the required conformity assessments to be carried out under the responsibility of the system manufacturer, in

compliance with the safety requirements and the essential requirements of the relevant laws and regulations,

especially of a Community nature, applicable in this matter according to the destination countries.

Signed for and on behalf of:

WARNINGS

Never attempt to install in potentially explosive environments or environments containing gas.

Disposal of waste from electrical and electronic equipment (WEEE)

The presence of this symbol means that:

● the product cannot be disposed as solid municipal waste and it has to be collected separately;

● the product can be returned to the dealer when a new equivalent product is purchased;

● the users have to contribute to correct recovery, improper use or disposal of this appliance may

pollute the environment or damage the human health;

● the failure to comply with the aforementioned instructions is punished by law.

For further information, refer to the site www.coopbilanciai.it.

DD2060X-Series

Place and Date of issue:

Campogalliano, 15/11/2018