Avol AMB620i Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереосистема Avol AMB620i. Avol AMB620i 6 страниц. Multimedia audio system for your ipod
Печатать страницуBasic Operation
Radio
1.
Press MODE to select RADIO mode. (Display shows the radio frequency of the last selected wave-
band. Your preset station is also shown if you are listening to a preset.
2.
Automatic tuning:
→ Press and hold the SCAN button until the display begins to move, then release the button. The
tuner will scan up or down the band frequency until it finds the first strong station and stop on that
stations then store a program memory automatically. Repeat this process until the tuner stops on
your desired station.
Manual tuning:
→ Press and hold the SKIP+/SKIP- button repeatedly until the display is showing the frequency to
your desired station. Use the manual tuning method tp tune to weaker stations that are bypassed
during Automatic Tuning.
3.
Adjust the sound using VOL+/-.
4.
When you have finished listening to the radio, press POWER ON/OFF button to turn the unit off.
Hints for best reception:
FM: The receiver has a built-in FM pigtail aerial hanging at the rear cabinet. This wire should be totally
unravelled and extended for best reception.
Storing and using preset stations
You can store 10 FM radio stations in the memory.
1.
Press SKIP+/SKIP- button to tune your desired station.
2.
Press and hold MEMORY/SET button in a second,. ("MEMORY" will flash on the display) to activate
the programming mode.
3.
Press SKIP+/SKIP- button to select the preset number you desired.
4.
Press MEMORY/SET button to store the station.
5.
Repeat step 2-4 to store your another stations
6.
Press MEMORY/SET button to listen to a preset stations.
iPod
Playing and charging your iPod
NOTE:Before plugging your iPod in the dock, snap the suitable insert into the dock to provide a snug fit for
the player to be docked.
1.
Snap the compatible iPod into the dock connector.
2.
Press MODE to select IPOD then switch on the dock mode.
3.
Then, iPod will playback automatically.
→ By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4.
Turn VOL+/- to adjust the sound level.
5.
Press POWER ON/OFF button to turn unit on/off.
NOTE: If your dock an iPod with a drained battery, it may take up to 6 minutes of charging before the iPod
will respond.
1st Gen Nano
1st Gen Nano
iPod mini 4GB/8GB
iPod nano 2GB/4GB
*Remark: This model does not support "video out".
Ipod Mini
Thin Ipod
Ipod Mini
Thin Ipod
3rd nano 4GB/8GB
5th 30GB
iPod classic 80GB
ENG-6
Basic Operation
USB
1.
Insert your USB Drive into USB jack.
2.
Press MODE to select USB then switch on the dock mode.
3.
Then, USB will playback automatically.
→ By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4.
Turn VOL+/- to adjust the sound level.
5.
Press POWER ON/OFF button to turn USB off.
NOTE:
Before removing your USB Drive, press
Drive
life.
CARD
1.
Insert your SD/MMC CARD into CARD jack.
2.
Press MODE to select CARD then switch on the dock mode.
3.
Then, CARD will playback automatically.
→By using the buttons (PLAY/PAUSE, SKIP+/- and VOLUME) and its remote control, the following
disc playback features are available: Play/Pause, selecting next/previous track and changing
volume.
4.
Turn VOL+/- to adjust the sound level.
5.
Press POWER ON/OFF button to turn CARD off.
NOTE:
Before removing your CARD, press
POWER ON/OFF button. If not, it will damage your
Connecting an external device
You can listen to the sound of the connected external device through your another audio devices.
1.
Use a line-in cord (not included) to connect an iPod shuffle or another audio devices to the LINE-IN
Jack.
2.
Press MODE to select AUX mode.
3.
The iPod shuffle or another audio device will now play through the speakers of the units.
Using Sleep Mode
This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period
of time. There are eight sleep time options.
Setting and switching off SLEEP
1.
Set your timer by pressing SNOOZE repeatedly until the desired timer option appears.
→ Selections are follows (time in minute):
00 => 05 => 10 => 15 => 30 => 45 => 60 => 90 => 120
2.
The set will turn off automatically at the selected time.
3.
To cancel sleep, press either:
→ SLEEP once or more until "00" disappears from the display.
POWER ON/OFF button. If not, it will damage your USB
ENG-7
CARD life
.