ALLIED ELECTRONICS NeXGen Prime Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер ALLIED ELECTRONICS NeXGen Prime. ALLIED ELECTRONICS NeXGen Prime 9 страниц. Forecourt controllers

Печатать страницу
1

General Information

NeXGen Prime (NXG-P) provides NeXGen (NXG) functionality using more powerful and modern
hardware. The Compact Flash and SRAM have been replaced by an SSD (Solid State Drive).
Operationally, NXG-P includes the ANDI forecourt controller functionality and is similar to Aegis,
but without the presence of the Windows Embedded system.
Take note that the term ANDI refers to the Allied Network Dispenser Interface – which is the
protocol on which the embedded forecourt controller application is based.
The firmware operates identically on NXG-P as it does on NXG and Aegis hardware, with the
configuration and reset exceptions detailed in the Installation Manual.
NXG-P is a quad-core system running INtime, a real-time operating system (RTOS) that hosts
the ANDI-based embedded forecourt control application.

1.1 Scope

NXG-P is, essentially, NXG firmware running on Aegis hardware, without the Windows
component.

1.2 Warranty

The controller has a one-year parts warranty only, from date of installation, which can
either be phoned in, submitted using the warranty registration card enclosed with every
controller or completed on the Allied Electronics website.
Allied Electronics: Register your product for warranty
If the start-up information is not registered with our office within thirty (30) days of
installation, warranty will begin from the date of shipment. Allied will warrant the controller
against defects but not against physical damage or improper installation. All controllers
being returned "under warranty" must be accompanied with an Allied RMA number.
When calling Allied for an RMA number, you will be asked for the controller serial
number, located on the base unit, and a description of the problem. When requesting
Allied for an RMA number, you will be asked for the controller serial number, located on
the base unit, and a description of the problem. Send your request via e-mail to
NeXGen Prime
Page 4 of 9