ALLIED MEDICAL Ki Mobility Catalyst 5 Руководство по настройке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по настройке для Инвалидное кресло ALLIED MEDICAL Ki Mobility Catalyst 5. ALLIED MEDICAL Ki Mobility Catalyst 5 11 страниц.
Печатать страницу
Adjusting Seat to Footplate Height on a Front Mount Hanger
Front mount hangers offers from 3.5" knee-to-heel capability in .5" increments.
1. Remove screw (G) using a 5mm Allen key and 10mm spanner
2. Determine correct hole for the desired footrest height
3. Re-install screw (G), washer (E), saddle spacer (D), washer (C), washer (B) and nut (A) using a
5mm Allen key and a 10mm spanner.
4. Repeat steps on opposite side
Adjusting Seat to Footplate Height on an Extension Tube Hanger
Short, medium and long tubes are available – see table below for height ranges:
1. Remove the nut holding the extension tube in place using a 8mm spanner
2. Slide the extension tube up or down the hanger the appropriate height and line up the holes in
the hanger with the extension tube.
3. Re-tighten the nut ensuring that the bolt head sits in the groove in the composite casing.
Note: Take care to not over-tighten