Aqua One AquaStyle 980 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Аквариумы Aqua One AquaStyle 980. Aqua One AquaStyle 980 13 страниц. Aquarium
Также для Aqua One AquaStyle 980: Инструкции по сборке (4 страниц), Краткое руководство по эксплуатации (2 страниц)

Печатать страницу
Aqua One AquaStyle 980 Руководство пользователя
Introduction of Fish
Note: This is only a guide! You should seek
professional advice from your aquarium specialist
at the time of purchase.
DO NOT ADD ALL FISH AT ONCE!
Build stock levels slowly over time. Allow at least
one week between additions of fish. Add a filter
supplement to help the biological system cope
with the additional waste.
Do not over crowd. Remember all fish will grow, so
allow them adequate space.

Tank Maintenance

DAILY
Feed your fish as per instructions on your
fish food container.
Check fish ensure they are eating, breathing and
swimming normally.
Check temperature.
Count fish numbers.
Ensure all filters, pumps, heaters and other aquarium
accessories are functioning correctly.
WEEKLY
Test and adjust pH levels if needed
Use Aqua One quality pH test kit, available from
your local Aqua One retailer. pH is a measure of
how acidic or alkaline the water is. It is measured on
a scale of 0-14 in which 7 is neutral, less than 7 is
acidic and more than 7 is alkaline.
Some species require specific pH levels please
seek advice from your aquarium specialist.
FORTNIGHTLY
25% Water Change
What you will need: A bucket, gravel cleaner, towel,
water conditioner, filter supplement and clean
hands. All items are available from your local Aqua
One retailer.
1. Unplug the light unit and remove it from the
aquarium. Place it somewhere safe away from
water & where it will not be broken / damaged.
2. Turn the power head off.
3. The fish and plants do not need to be removed
when doing any maintenance.
4. Place the towel on the floor in front of the aquarium
to guard from water spillage.
5. Use an Aqua One 4 in 1 algae scraper (Sold
separately) and gently scrape away any algae
growing on the glass or filter pipes.
6. Using an Aqua One gravel cleaner* (Sold
separately) empty approximately 25% of the
aquarium water into the bucket. Take note of how
much water is emptied.
7. Fill the bucket up with the same amount of water
that was removed from the aquarium.
8. Treat the tap water with Aqua One water
conditioner (Sold separately) as per the instructions
on the bottle.
9. Let the bucket sit for 10 minutes.
10. Fill the aquarium up slowly to the level indicated
on page 6
11. Turn the power head back on and ensure that
water is flowing out of the spray bar.
12. Test and adjust pH levels.
13. Add a filter supplement .
12. Replace the light unit.
* Refer to the instructions on the back of your gravel
cleaner to ensure correct use.
7