Billib Mantel & Wall Clocks Инструкция по эксплуатации и уходу - Страница 7

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации и уходу для Часы Billib Mantel & Wall Clocks. Billib Mantel & Wall Clocks 10 страниц.

Печатать страницу

billib

caring for your BilliB clock

Care of Your Sligh Clock

Replacing Suspension Spring

If the suspension spring is damaged, it may

be replaced. Remov e the pendulum and

unscrew the small knurled bolt in the

suspension post which holds the spring in

position. Hook the pendulum hanger to the

new spring and insert the spring into the

suspension post. Align the hole in the top

portion of the spring with the hole in the

suspension post and replace the kn urled bolt

(Fig. 13).

Moving Your Clock

Before moving clock, always remove weights

and pendulum, if your clock has them. If the

clock is to be transported by vehicle, all parts

must be protected b y the original packaging

or similar materials.

Replacement Parts

Parts may be ordered through your local

BilliB Dealer . Identify the clock model,

movement, and registration numbers, in

order to properly identify the part.

Care of the Movement

Dust is the enemy of all precision machined

parts. Protect your clock from dust, chemical

vapours and areas of constant vibration

Your clock movement should be oiled by a

qualified repair person approximately ever

five years, and cleaned at regular intervals

as recommended by the repair person. Only

the finest clock oil should be used. Oil should

never be randomly sprayed or applied on the

mechanism. This does not apply to battery

operated models.

Fig. 13

Knurled

Bolt

Suspension

Spring

Pendulum

Hanger

Billib

Fig. 15

Always spray cleaning products on soft

cloth, not directly on surface of clock.

Care of Clock's Wood Finish

BilliB Clock's beautiful hand-polished finish

will last f or generations. Regular dusting with

a soft, lint-free cloth such as cotton, flannel,

terrycloth or cheesecloth will help maintain

the w ood's or iginal luster . Using a slightly

dampened cloth will cut down on friction,

avoid scratches, and help reduce static

electricity that attracts and holds dust.

The beauty of the cloc k case can be maintained

by periodically using a self-cleaning fur n iture

polish. Soap and water is not a thorough

cleaner f or w ood products . Self-cleaning

furniture polishes contain both wax and

solvents which maintain luster and provide

adequate cleaning under most circumstances.

If a more thorough cleaning is necessar y, use

odourless mineral spirits.

Always protect your BilliB Cloc k from conditions

of e xcessive heat, cold, dampness , and

strong sunlight.

In the event of small marks or scratches, use

a touch-up stick or scratch remover, available

from most paint stores.

Care of Brass Parts

The fine brass accents of your BilliB Clock

should only be handled with soft cotton

gloves or a soft cloth. Dust with a fine, soft,

clean cloth.

NEVER use an abr a sive cleanser, permanent

damage will result from its use.

Cleaning Glass

Avoid getting cleaning products on brass

surfaces. Spray glass cleaner on a soft

cloth and then wipe glass surfaces. Never

spray directly onto the cabinet or brass

finish (Fig. 15).