AVPro Edge AC-MX1616-AUHD Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Матричный коммутатор AVPro Edge AC-MX1616-AUHD. AVPro Edge AC-MX1616-AUHD 4 страницы. 18gbps true 4k60 4:4:4 16x16 matrix (ultra low profile)
Печатать страницу
IR Details:
IR IN on this machine is for controlling the AC-MX1616-AUHD, RS232 or IP
Control are the recommended methods, but IR can be used in some circumstances.
The IR INPUT is for an IR Receiver EYE only. The IR Receiver Eye below can plug into the IR Ext.
port.IR
1. Use the supplied IR Remote and select the OUTPUT then INPUT
2. Lear IR Codes from the supplied remote
3. Use discreet NEC/HEX IR Codes to program a 3rd party control system or IR remote. Check
www.avproedge.com for discreet IR codes, or contact us to get them.
Troubleshooting
•Verify Power - The LCD screen on the front of the matrix should be lit up when
power is applied. Check that both power supplies are connected to the matrix and
powered
•Verify Connections - Check that all cables are properly connected
•Issues with one INPUT/OUTPUT - Swap ports/cables/etc to help narrow down if the
issue stays with the input/output/etc
•Issues with 4k but 1080p or less is working, Verify all connected devices are
capable of the signal you are sending
Have a question or need assistance?
Don't hesitate to contact us!
SUPPORT: +1 605-274-6055
USA TOLL FREE: 877-886-5112
EMAIL: [email protected]