AVPro Edge AC-CX42-AUHD Краткое руководство по эксплуатации

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Переключатель AVPro Edge AC-CX42-AUHD. AVPro Edge AC-CX42-AUHD 7 страниц.

AC-cX42-AUHD & AC-cX62-AUHD

conferx classroom/conference room matrix switchers

Quick Start Guide

The AC-CX42-AUHD/AC-CX62-AUHD is a HDMI/HDBT matrix switcher. Supporting HDMI 2.0(a/b), HDCP 2.2, up

to 4K video resolution, and up to 18 Gbps bandwidth(18Gbps through HDMI ports only). This switch

allows any source to be shown on any of the connected displays. This matrix features a HDBT input(s)

and an HDBT output for video, RS232, and IR extension up to 100M (330Ft). Conference room all-star.

The auto-switching feature makes this unit an ideal, affordable, component for any conference room

system. Ideal for feeding a video signal into a video conferencing codec with very little setup. This is

an ideal solution for digital entertainment centers, HDTV retail, show sites, data centers, schools,

conference and training centers and more!

This quick start guide will be going through:

•

Installation

•

Front/rear Panel Control

•

EDID management

•

IR & RS-232 Control

•

LAN Control

•

troubleshooting

Quick Installation:

1. Connect the HDMI/HDBT input sources (PC, Wall Plate, etc...) to the AC-CX42-AUHD/AC-

CX62-AUHD.

2. Connect the HDMI/HDBT output devices (Display, Distribution Amplifier, Projector,

Receiver) to the AC-CX42-AUHD/AC-CX62-AUHD.

3. Power on the sources.

4. Connect the power supply into the AC-CX42-AUHD/AC-CX62-AUHD.

5. Turn on output devices/displays.

6. Use the front panel controls, supplied IR remote or free LAN (IP: 192.168.001.239) to

control the matrix.