AVPro Edge AC-CXWP-HDMO-100KIT Краткое руководство по эксплуатации - Страница 3

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Передатчик AVPro Edge AC-CXWP-HDMO-100KIT. AVPro Edge AC-CXWP-HDMO-100KIT 4 страницы. Wall plate transmitters

Печатать страницу
Input Switching:
Each wall plate utilizes auto sensing technology. This means once a source is connected the
wall plate will recognize the connection and automatically send the signal to the display.
For the VGA and MDP wall plate: if you already have a source plugged into the wall plate and
you plug in another source the wall plate will automatically switch to the source that was
just put in.
If you have 2 sources plugged into the VGA/MDP wall plate you can switch between the inputs
by pressing the square lit up button. A green light indicates that MDP/VGA is being used and an
amber colored light indicates that HDMI is selected.
If the active source is unplugged it will automatically switch to the other plugged in source.
EDID Management:
EDID management allows you to manage
the input device (typically the display) to
request specific video resolutions and/
or audio codecs from a source. EDID can
be toggled using the turn dial (Located on
bottom of unit opposite of HDBT port).
Use a flathead screwdriver to toggle be-
tween different preset EDIDs by twisting
the dial to the preferred EDID. The following choices are available:
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
A.
B.
C.
D.
E.
F.
4K60HZ 420 3D 2Ch [Default]
4K60HZ 420 3D 4CH
4K60HZ 420 3D 8CH
4K60HZ 420 HDR BT2020 3D 2Ch
4K60HZ 420 HDR BT2020 3D 6Ch
4K60HZ 420 HDR BT2020 3D 8Ch
4K30HZ RGB 3D 2CH
4K30HZ 444 3D 6CH
4K30HZ 444 3D 8CH
4K30HZ 444HDR BT2020 3D 2CH
4K30HZ 444HDR BT2020 3D 6CH
4K30HZ 444HDR BT2020 3D 8CH
1080P60 RGB 8 BIT 3D 2CH
1080P60 444 3D 6CH
1080P60 444 3D 8CH
Copy from output