Allied Telesis AT-FS232/1 Series Информационный лист - Страница 2
Просмотреть онлайн или скачать pdf Информационный лист для Переключатель Allied Telesis AT-FS232/1 Series. Allied Telesis AT-FS232/1 Series 2 страницы. Fs200 series 2 port fast ethernet speed/media converting switch
Также для Allied Telesis AT-FS232/1 Series: Информационный лист (2 страниц), Информационный лист (2 страниц)
Печатать страницу
FS200 Series
| 2 Port Fast Ethernet Speed/Media Converting Switch
AT -FS201 and AT -FS202
Status Indicators
System LEDs
Power
Indicates power is applied to the
converter
Per Fiber Port:
Link/Activity
Indicates valid/invalid link
Indicated data is being received or
transmitted
Full-duplex/Collision Indicates operation at either full or
half-duplex
Indicates collision during transmission
on the port
Per Copper Port:
Link/Activity
Indicates valid/invalid link
Indicates data is being received or
transmitted
Full-duplex/Collision Indicates operation at either full or
half-duplex
Indicates collision during transmission
on the port
Auto-negotiation
Indicates port is set for auto-
negotiation
100M
Indicates operation at either 10T or
100TX
Operational Characterisitcs
(Each port can be configured via the following switches)
Per Fiber Port:
Duplex
Selects either full- or half-duplex
operation
Bytes
Selects maximum packet size sent by
switch (1518 or 1522 bytes)
Per Copper Port:
Auto
Selects auto-negotiation mode or
manual setting
Duplex
Forces port to full or half-duplex
operation
(Auto setting = manual only)
Speed
Forces port to 10 or 100Mbps
operation
(Auto setting = manual only)
Bytes
Selects maximum packet size sent by
switch (1518 or 1522 bytes)
MAC address table 2k addresses
Forwarding/Filtering Rate
148,880pps for 100Mbps
14,880pps for 10Mbps
Latency
14.3µsec
(64 byte packet, 100Mbps full-duplex)
USA Headquarters
|
19800 North Creek Parkway
European Headquarters
|
Via Motta 24
Asia-Pacific Headquarters
|
11 Tai Seng Link
www.alliedtelesis.com
© 2009 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
Operational Mode
MissingLink (ML)
Link Test
AT -FS232, AT -FS232/1 and AT -FS232/2
Status Indicators
System LEDs:
Power
Indicates power is applied to the
converter
Mode status
Indicates operating mode, MissingLink,
Smart MissingLink and Link Test
Per Fiber Port:
Link
Indicates a valid receive link exists
Duplex
Indicates full or half-duplex operation
Collision
Indicates collision during packet
transmission on the port
Per Copper Port:
Link
Indicates a valid receive link exists
Speed
Indicates either 10 or 100Mbps operation
Auto
Indicates port is set for auto-negotiation
FD/Collision
Indicates collision during packet
transmission on the port
Indicates full or half-duplex operation
Operational Characteristics
(Each port can be configured via the following switches)
Per Fiber Port:
Duplex
Selects either full or half-duplex
operation
Per Copper Port:
Auto
Selects auto-negotiation mode or manual
setting
Duplex
Forces port to full or half-duplex
operation
(Auto setting = manual only)
Speed
Forces port to 10 or 100Mbps operation
(Auto setting = manual only)
MAC address table 2k addresses
Forwarding/filtering rate
148,880pps for 100Mbps
14,880pps for 10Mbps
Latency
14.3µsec
(64 byte packet,100Mbps full-duplex)
|
Suite 100
|
Bothell
|
6830 Chiasso
|
Switzerland
|
T: +41 91 69769.00
|
Singapore
|
534182
|
T: +65 6383 3832
|
WA 98011
|
USA
|
T: +1 800 424 4284
|
F: +41 91 69769.11
|
F: +65 6383 3830
Operational Mode
MissingLink (ML)
Smart MissingLink (SML)
Linktest
Power Characteristics
Input voltage (auto-ranging)
External power supply 100-120V AC/60Hz,
220-240V AC/50Hz
Input supply voltage
12vDC +/- 5%
Max current
.5
Power consumption
6W
Environmental Specifications
Operating temp. 0°C to 40°C
Storage temp.
-20°C to 80°C
Relative humidity 5% to 95% non-condensing
Operating altitude 0 to 10,000 feet
Physical Characteristics
Dimensions
10.5cm x 9.5cm x 2.5cm
(4.12" x 3.75" x 1.0")
Weight
0.7lb
Electrical/Mechanical Approvals
EMC
FCC Class A
Safety
UL-Cul, CSA/CSA, NRTL, TUV,
CE compliant
Ordering Information
AT-FS201-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (ST), 2km
AT-FS202-xx
2 port Fast Ethernet switch,
10/100TX to 100FX (SC)
AT-FS232/y-xx
2 port Fast Ethernet switch media converter
10/100TX to 100FX (SC)
Where y = Multi-mode fiber 2km
1 single-mode fiber 15km
2 single-mode fiber 40km
Where xx =10 AC power supply, US power cord
20 AC power supply, European power cord
30 AC power supply, UK power cord
40 AC power supply, Australian power cord
Associated Products
12 slot AC or DC powered chassis
AT-MCR12
Mounting tray for up to four devices
AT-TRAY4
Mounting tray for one device
AT-TRAY1
Wall-mount for one device
AT-WLMT
|
F: +1 425 481 3895
617-00342 Rev J